hendrixhc

Nice work on the engine, could have done with a polished sump!
 
Nice clear photos to.

funny you say that I was actually just reading your xe thread


Sent from my iPhone using Tapatalk

You been reading my project threads again?

Might be easier just to find an eseries LSD and do the popular conversion.
 

I just used VHT gloss caliper paint, no priming required.
Been on 2 years now, no chipping and still shines like a mutherfucking diamond!
 

sorry im out. My XG is on a holiday and i just checked and have no photos of that area.

UPDATE: I replaced the circuit breaker and it’s fixed, thank you all

MIght be worth mentioning a few handy hints on how to get rid of the smell of fucking diff oil to. That shit stinks and doesnt go away!

MIght be worth mentioning a few handy hints on how to get rid of the smell of fucking diff oil to. That shit stinks and doesnt go away!

MIght be worth mentioning a few handy hints on how to get rid of the smell of fucking diff oil to. That shit stinks and doesnt go away!

If you look near the relays you will see a circuit breaker. It looks like a square metal block with 2 large wires going to it. This will be corroded internally and failing.

If you look near the relays you will see a circuit breaker. It looks like a square metal block with 2 large wires going to it. This will be corroded internally and failing.

If you look near the relays you will see a circuit breaker. It looks like a square metal block with 2 large wires going to it. This will be corroded internally and failing.

I went auto floor shift from column. Thats was a piece of piss but it doesnt answer any questions! 

Can you tell me which lifter shim was missing cause thats exactly how i want mine to sound?

Or buy a new Holley 650DP.

no

easily found on google
 
Dirty or clogged oil filters allow contaminants to sail straight to your engine where they can cause damage as well as affect fuel economy. You also risk blocking the flow of oil to your engine, which could result in engine failure. Protect your engine with a fresh oil filter, replaced every time you change your oil.

easily found on google
 
Dirty or clogged oil filters allow contaminants to sail straight to your engine where they can cause damage as well as affect fuel economy. You also risk blocking the flow of oil to your engine, which could result in engine failure. Protect your engine with a fresh oil filter, replaced every time you change your oil.

@SLO247 should be able to get the bits you need. He's in adelaide to.

I have used 2 aerpro fascias, one uspide down and back to front.
I also reshaped the heater box by cutting out the hump in the middle and will be fixing in a right angle plate to give something to mount the back to.

Welcome aboard Bud!
Looks like its time for some custom fabrication and some polishing!

Eg

Sent from my SM-G950F using Tapatalk

Yeah autosol is a bit like toothpaste and has a really fine grit in it. gets rid of all the sanding scratches.
It does leave a protective film over the metal which you will notice when you go to wash them. Thats why a i used the degreaser and wax and grease remover to remove it before painting.