uterus

Yeah tried that. i may have to just replace it i think behind the screen plate its just a vasic double din stereo and i have seen you can buy a facia cover plate of ebay. Think this will have to be my option.

So ive contacted ford i have serial number of stereo the vin no and number plate apparently the pin has never been recorded and ford dont have it. So if anyone has any ideas how to acheive it im all ears panasonic themselves are no help either.

Ok so its not a falcon but i did something stupid i changed the battery on my wifes zd ford escape and the radio has a code. Any ideas how to retrieve this? not in the book and no card with it on it.

Hahaha and here i was thinking sand it down and paint it but yes i kind of like the way it looks also lol it will stay the same hight as i love the look of them that high and it has air gas struts in the back so pump them up high in the rear 70s style and i have cleaned up one of those rims and looks ok but i am looking for sum hotwires atm. Im really old school when it comes to my cars. Its registered already so thats a plus and i drove it yesterday for tbe first time and shit it was awesome. Full electrics as its the marquis and im avtually doing it up for my son who is 13 its his 17th birthday present will always remain in my name gor insurance reasons and when he wants a new car like most kids do i will get it back

Haha yeah my daughter loves her rainbows Nah mate mig welder its one time i favour my mig over the stick. im a sheetmetal worker by trade so i love making stuff i gave it up nearly 4 years ago after 20 years of doing it just lost the passion for it. Now i work full time at bunnings and suprisignly the pasdion for fabricating has come back and i love working on cars and 18 months ago i cut the rust out of this zh so i know it was done properly. Found sum more yesterday in the chassis so i will plate that too.

You can hardly tell They do point up but i was trying to fit in between the springs and inbetween the fuel tank and miss the floor pan then have it tucked under the bumper and thats how i did it

Yeah it points up about 6mm more that the passengers side one but once id realised i just didnt care. Plus when its of the ramps you cant tell luckily

I finally got the exhausts in different extractors were used before so these didnt fit. So i did a bit of modifying! And as you can see in the first pic the bumper only had 1 cut out so i made another. All in all im pretty happy. I will start a build thread tonorrow just a teaser of what ive been up to the last couple of days.

Oh trust me i thought i was never going to have it running either i put in electronic dizzy had both wires on the same side so had no spark. Changed it over then no fuel looked at my f100 set up of fuel pump realised i put hoses on back to front lol first job today is to change them over. Gotta love being on holidays

I should do a build thread. I have been working on this for 3 months now. I cut the rust from a 1979 f100 and took this licenced zh as payment.

Hi guys i ended up pulling the engine back out to fit them it was so much easier im getting pretty good at getting an engine in and out in under 2.5 hours on my own lol

Scrap that i put hoses on back to front on pump lol

Ended up removing the engine fitred the extractors put engine back in finally got it started now to figure out why the fuel isnt getting up to carby i primed fuel from tank to the pump but nothing from pump to carby. Filter is new and facing the right way pump was working 5 months ago when the engine was last running. I was thinking that it just needs sum more priming? I only just now got it to run i poured fuel down the carby but before i was turning it over i had no spark but the electronic dizxy i had bith wires on same side on coil since i have changed it over it fired up with the little fuel that was in carby then cut out so im thinking may need sum aerostart to keep it running and pump should prime?

All good i have the engine half back out end of the day its going to be easier to fit them i reckon

Yeah im thinking of just pulling the engine back out.