hendrixhc

I made a simple frame and bolted it to the floor of the boot in the XE.
 

 
The battery box and isolator switch and fuse bolt to it.
 

 

 

 

 

 
The a quick lick of carpet and she was done!
 

I made a simple frame and bolted it to the floor of the boot in the XE.
 

 
The battery box and isolator switch and fuse bolt to it.
 

 

 

 

 

 
The a quick lick of carpet and she was done!
 

Yeah man should be the 1.4 will be good for top coat 2pak the 1.5 and 1.8 will work for acrylic and the 1.8 is also a good size for a primer gun in either 2k or acrylic

OK!

Bare metal. Etch. Prime. Bog. Smoothe. Prime. High fill. Wet sand 600. Base colour. Clear coat.
 
Sounds simple.
 
Steves right tho. But cold at the minute unless you got heaters.

You can by a primer filler which will do the prime and hi fill. You can use more thinners to thin it down as well. I got mine from crash supplies at stepney.

Bare metal. Etch. Prime. Bog. Smoothe. Prime. High fill. Wet sand 600. Base colour. Clear coat.
 
Sounds simple.
 
Steves right tho. But cold at the minute unless you got heaters.

My guess would be to install the box with the pitman arm off and turn it full lock one way, then full lock the other way and count the number of turns. Then turn it back exactly half and line up the pitman arm with the wheels pointed straight ahead and the steering wheel in the correct position. Then off for a wheel alignment!

I thought you guys were sitting next to each in the same room!

Any hair dresser or barber shop. Usually round $20. My mrs does mine at home.

I thought you guys were sitting next to each in the same room!

I thought you guys were sitting next to each in the same room!

Obviously take care with the heat gun Squid otherwise you'll be scorching the paint! 

Any hair dresser or barber shop. Usually round $20. My mrs does mine at home.

What about a kit like this :
 
http://www.bestmufflers.com/bshop/product_info.php?cPath=759_781&products_id=4219&osCsid=63e0eaf11ac38185c45950cdb46c6345
 
 
You can also get mandrel bends and straight pipe from the same place. Service is quite good too - quick delivery

Any hair dresser or barber shop. Usually round $20. My mrs does mine at home.

Any hair dresser or barber shop. Usually round $20. My mrs does mine at home.

Yeah check my project thread James. I've updated it and its in there.

way how your engine bay is. it would end up all smooth like with a clevo in it.
be easy fix for ya. just enginebay if you aint to electric savy

I doubt i could fix it!

Try page 12 post 235. Thats where the cutting and shutting was!

Lol!
 
Its up to 100 pages on Xfalcon!

Lol!
 
Its up to 100 pages on Xfalcon!

Fair call! Ill try and find it!

I doubt i could fix it!