If you are planning to turbo, you are better off with stock or slightly longer than stock rods anyway. I would not use 200 rods, the benefit of the longer rods is for NA applications. There are pistons that exist for the AU rods that will work, but you will need to look. Just make sure the rod length + piston compression height add up to the same value as it does with the stock setup. If it is price that turned you off of the Spool rods, forget about 300hp NA + more later. If you have never driven a near stock crossflow and a decent sized turbo (say GT3582R) running 8-12 psi boost, you should try that first before committing to this build.