PRO250

It should be illegal NOT to put a V8 into a Cortina. If you get done for it you'll have a story to tell your grandkids.
 
I'd do it, you only live once, live hard, die sideways. (in which case someone else will have to tell the grandkids.) lol 

Same as a ute, panel van and the fairlane/LTD.

Ive made a kit to fit a EFI wizzor into a TE ill tell you its a tight fit, hell knows how there sticking a clevo in them

Thats the norm dave they all seem like poo

Your having good luck aaron, I had to do my ute for its roady, it looked like that and it was all new. replaced it all anyway and 10.000km in its all broken again

what shits me is having to do a job twice cause of them rubber boots most go like that in a short amount of time I did a brand new Cortina front end last year that car has never moved more then in and out of the shed and is lik that 

Dont apologise go cortys
 
Do you even need to strip one out, my orange ones just under 1100kg as a 6cyl they weight nothing
 
350 at the feet in one at 2700 pounds will go 10s, ill be here soon not telling whats sitting in my shed till its in the car and making 400rwhp more on this when ive done it

if they made a v8 corty there wound be a  lot of dead people i think, there stupid to drive the grey car runs flat 12s at 116 as a full street rig on street tyres full exhausts and thats a 2k hydraulic clevo and a 2400 converotr and 3.5 gears, a ok solid engine and a 5k convertor and 4.11s would see easy 10s, crap id be there if that car was not just sitting under a cover while i make boosty noises HAHA
 
im not a millionair but if cortys are ever worth over the 10k mark i have a full on nest egg going ill own all the cortys in vic in the next 10 years at the rate im going

if they made a v8 corty there wound be a  lot of dead people i think, there stupid to drive the grey car runs flat 12s at 116 as a full street rig on street tyres full exhausts and thats a 2k hydraulic clevo and a 2400 converotr and 3.5 gears, a ok solid engine and a 5k convertor and 4.11s would see easy 10s, crap id be there if that car was not just sitting under a cover while i make boosty noises HAHA
 
im not a millionair but if cortys are ever worth over the 10k mark i have a full on nest egg going ill own all the cortys in vic in the next 10 years at the rate im going

if they made a v8 corty there wound be a  lot of dead people i think, there stupid to drive the grey car runs flat 12s at 116 as a full street rig on street tyres full exhausts and thats a 2k hydraulic clevo and a 2400 converotr and 3.5 gears, a ok solid engine and a 5k convertor and 4.11s would see easy 10s, crap id be there if that car was not just sitting under a cover while i make boosty noises HAHA
 
im not a millionair but if cortys are ever worth over the 10k mark i have a full on nest egg going ill own all the cortys in vic in the next 10 years at the rate im going

crank trigger looks cool ando  so this is going in that corty?. ivan and I played with a crank trigger on my blown engine with 6 coil packs in 2004 I think, I never nutted it out as I wanted it and when that engine rolled good numbers without it on a stock dissy locked up with a MSD I binned the idea. a mate wanted it and he was more electronicley  minded then I was back then.

I read that summer nats stuff and how that hemi did 13.2 with no mph but the power it had was 50ish hp less the my towtoy makes and its even slower, its car setup if it will not move it will not mph and will not cut a number you don't have to add up to know that

The dyno comps ron and i did when I used to waste money shown me you can do a lot to power by gearing and setup, my car did no mph as ron had it, but with a much fatter tune that car picked up 7mph power level it makes does not always mean its working  

I should pull my crossy out and try some of these ideas out as they where not around in the early 2000s no one even knew what caused the dissy to flog out or why they shake themselves to bits at revs but its common knowledge nowadays. I just boost stuff now  no revs and decent power and much more torque. wish id done a full tune with triples with ron he would have done ok out of that thing

but hell with that boost everything I can see it now thor now boosted HAHA

crank trigger looks cool ando  so this is going in that corty?. ivan and I played with a crank trigger on my blown engine with 6 coil packs in 2004 I think, I never nutted it out as I wanted it and when that engine rolled good numbers without it on a stock dissy locked up with a MSD I binned the idea. a mate wanted it and he was more electronicley  minded then I was back then.

I read that summer nats stuff and how that hemi did 13.2 with no mph but the power it had was 50ish hp less the my towtoy makes and its even slower, its car setup if it will not move it will not mph and will not cut a number you don't have to add up to know that

The dyno comps ron and i did when I used to waste money shown me you can do a lot to power by gearing and setup, my car did no mph as ron had it, but with a much fatter tune that car picked up 7mph power level it makes does not always mean its working  

I should pull my crossy out and try some of these ideas out as they where not around in the early 2000s no one even knew what caused the dissy to flog out or why they shake themselves to bits at revs but its common knowledge nowadays. I just boost stuff now  no revs and decent power and much more torque. wish id done a full tune with triples with ron he would have done ok out of that thing

but hell with that boost everything I can see it now thor now boosted HAHA

crank trigger looks cool ando  so this is going in that corty?. ivan and I played with a crank trigger on my blown engine with 6 coil packs in 2004 I think, I never nutted it out as I wanted it and when that engine rolled good numbers without it on a stock dissy locked up with a MSD I binned the idea. a mate wanted it and he was more electronicley  minded then I was back then.

I read that summer nats stuff and how that hemi did 13.2 with no mph but the power it had was 50ish hp less the my towtoy makes and its even slower, its car setup if it will not move it will not mph and will not cut a number you don't have to add up to know that

The dyno comps ron and i did when I used to waste money shown me you can do a lot to power by gearing and setup, my car did no mph as ron had it, but with a much fatter tune that car picked up 7mph power level it makes does not always mean its working  

I should pull my crossy out and try some of these ideas out as they where not around in the early 2000s no one even knew what caused the dissy to flog out or why they shake themselves to bits at revs but its common knowledge nowadays. I just boost stuff now  no revs and decent power and much more torque. wish id done a full tune with triples with ron he would have done ok out of that thing

but hell with that boost everything I can see it now thor now boosted HAHA

crank trigger looks cool ando  so this is going in that corty?. ivan and I played with a crank trigger on my blown engine with 6 coil packs in 2004 I think, I never nutted it out as I wanted it and when that engine rolled good numbers without it on a stock dissy locked up with a MSD I binned the idea. a mate wanted it and he was more electronicley  minded then I was back then.

I read that summer nats stuff and how that hemi did 13.2 with no mph but the power it had was 50ish hp less the my towtoy makes and its even slower, its car setup if it will not move it will not mph and will not cut a number you don't have to add up to know that

The dyno comps ron and i did when I used to waste money shown me you can do a lot to power by gearing and setup, my car did no mph as ron had it, but with a much fatter tune that car picked up 7mph power level it makes does not always mean its working  

I should pull my crossy out and try some of these ideas out as they where not around in the early 2000s no one even knew what caused the dissy to flog out or why they shake themselves to bits at revs but its common knowledge nowadays. I just boost stuff now  no revs and decent power and much more torque. wish id done a full tune with triples with ron he would have done ok out of that thing

but hell with that boost everything I can see it now thor now boosted HAHA

crank trigger looks cool ando  so this is going in that corty?. ivan and I played with a crank trigger on my blown engine with 6 coil packs in 2004 I think, I never nutted it out as I wanted it and when that engine rolled good numbers without it on a stock dissy locked up with a MSD I binned the idea. a mate wanted it and he was more electronicley  minded then I was back then.

I read that summer nats stuff and how that hemi did 13.2 with no mph but the power it had was 50ish hp less the my towtoy makes and its even slower, its car setup if it will not move it will not mph and will not cut a number you don't have to add up to know that

The dyno comps ron and i did when I used to waste money shown me you can do a lot to power by gearing and setup, my car did no mph as ron had it, but with a much fatter tune that car picked up 7mph power level it makes does not always mean its working  

I should pull my crossy out and try some of these ideas out as they where not around in the early 2000s no one even knew what caused the dissy to flog out or why they shake themselves to bits at revs but its common knowledge nowadays. I just boost stuff now  no revs and decent power and much more torque. wish id done a full tune with triples with ron he would have done ok out of that thing

but hell with that boost everything I can see it now thor now boosted HAHA

T04E off fleebay not the best but there $300 bucks and will last a while if it runas a stock ecu its not making more then 8psi anyway so the turbo will last a while

Thats the norm dave they all seem like poo

Your having good luck aaron, I had to do my ute for its roady, it looked like that and it was all new. replaced it all anyway and 10.000km in its all broken again

what shits me is having to do a job twice cause of them rubber boots most go like that in a short amount of time I did a brand new Cortina front end last year that car has never moved more then in and out of the shed and is lik that 

Rebuilding someone elses car can be a pain, it can be easyer to start again sometimes

but put pen on paper and see if you can afford it. the wiring is scary that's for sure

I do, I looked at one last week HAHAHAH

they pull a 5500 pound truck around very well

I looked how you go about geyying power and TQ out of a 400 clevo I hope 460s are not as shit as those engines

all my clevos do it, never looked why I just set it the timing so its safe and forget about it

one runs a acell dissy other a msd billet one the other a factory bosch one

wait till the chain flogs a little the brown v8 corty has a old engine, man timing walk on that HAHA its like a merry go round just hope for more then 20 LOL

all my clevos do it, never looked why I just set it the timing so its safe and forget about it

one runs a acell dissy other a msd billet one the other a factory bosch one

wait till the chain flogs a little the brown v8 corty has a old engine, man timing walk on that HAHA its like a merry go round just hope for more then 20 LOL

Somone take pictures of mine, i think i could line one side of my shed with them

need more engine stands i think theres only 10


 

Jeesus, that has some epic over-run harmonics going on at speed......
 
The subwoofer vibrated itself across the floor, my desk split in two, the carpet started curling at the edges,
and I heard the neighbours yell EARTHQUAKE! and evacuate.

Damn a thread i cant post in - ive only got clevos and a spare clevo! 

Somone take pictures of mine, i think i could line one side of my shed with them

need more engine stands i think theres only 10


 

Somone take pictures of mine, i think i could line one side of my shed with them

need more engine stands i think theres only 10


 

Somone take pictures of mine, i think i could line one side of my shed with them

need more engine stands i think theres only 10