Jump to content

Leaderboard

  1. Outback Jack

    Outback Jack

    Members

    • Points

      24

    • Content Count

      5,202

  2. gerg

    gerg

    Members

    • Points

      21

    • Content Count

      9,904

  3. 2redrovers

    2redrovers

    Administrators

    • Points

      20

    • Content Count

      15,280

  4. Slow250XC

    Slow250XC

    Members

    • Points

      18

    • Content Count

      1,122

Popular Content

Showing content with the highest reputation on 08/15/2021 in all areas

  1. 6 points
    Thom

    Did the machine shop make a mistake?

    hucklburry and 5 others reacted to Thom for a post in a topic

    Pre crossflow use the same cam bearings as xflow, its an extra hole for the pre xflow to oil the rockers as they have an extra oil gallery to supply oil to the head and rocker shaft, that gallery gets supplied from the top of the cam journals, whereas xflow use the lifters and pushrods to supply the rockers with oil, its no real biggie just interchangeable bearings
  2. 2 points
    RuffXf

    Did the machine shop make a mistake?

    Outback Jack and one other reacted to RuffXf for a post in a topic

    Thanks fellas, still learning the finer details of these engines. Only real concern was a blocked oil gallery, but there ya go. Ford again sticking with what they knew worked
  3. 1 point
    Panko

    Panko's Mk1 Escort (Round 2)

    roKWiz reacted to Panko for a post in a topic

    I also had my reproduction stickers turn up today. Dealership sticker and rego sticker
This leaderboard is set to Melbourne/GMT+10:00
×