CHESTNUTXE 7,332 Posted February 14, 2018 Hmmmm i havent taken it down to the machine shop yet upon thismornings inspection just the first one is cactus but i will get em replaced so far the engine owes me $150 with mega hours of cleaning ect,but still about $400/500 of parts to go on it,and cam bearings are gunna blo the budget out but they are necessary itemI put the welch plugs inSent from my SM-G570Y using Tapatalk 2 Outback Jack and FOMOCOHO reacted to this Share this post Link to post Share on other sites
CHESTNUTXE 7,332 Posted February 24, 2018 I put the welch plugs inSent from my SM-G570Y using TapatalkRings are on 020Sent from my SM-G570Y using Tapatalk 2 Outback Jack and deankxf reacted to this Share this post Link to post Share on other sites
CHESTNUTXE 7,332 Posted February 26, 2018 Rings are on 020Sent from my SM-G570Y using TapatalkBearings came so i can start to do the bottom endSent from my SM-G570Y using Tapatalk 2 Outback Jack and deankxf reacted to this Share this post Link to post Share on other sites
CHESTNUTXE 7,332 Posted February 26, 2018 bottom end is almost done,just waiting for full gasket set coming tomozza,cause i cant go any further without putting the 1 piece rear seal in.turns very easy and nice,should have it 100 percent by tomorrow afo. 5 Valvebouncer, Outback Jack, 77xcfalcon and 2 others reacted to this Share this post Link to post Share on other sites
CHESTNUTXE 7,332 Posted February 27, 2018 bottom end is almost done,just waiting for full gasket set coming tomozza,cause i cant go any further without putting the 1 piece rear seal in.turns very easy and nice,should have it 100 percent by tomorrow afo.Interesting note 86da has a bigger rear main seal than the 84daSent from my SM-G570Y using Tapatalk Share this post Link to post Share on other sites
SPArKy_Dave 8,892 Posted February 27, 2018 I dunno that I'd trust those Chinese LYO oil seals. Personally, I always get OEM NOK brand seals. (either direct from Ford, or from a bearing wholesalers) 1 CHESTNUTXE reacted to this Share this post Link to post Share on other sites
CHESTNUTXE 7,332 Posted February 27, 2018 Yeah i have the same one in my ute motor and it leaks Share this post Link to post Share on other sites
CHESTNUTXE 7,332 Posted February 28, 2018 Yeah i have the same one in my ute motor and it leaksI got the full gasket set and note rocker cover gasket is not corkSent from my SM-G570Y using Tapatalk Share this post Link to post Share on other sites
deankxf 20,316 Posted February 28, 2018 efi rocker cover gasket? 1 CHESTNUTXE reacted to this Share this post Link to post Share on other sites
CHESTNUTXE 7,332 Posted March 1, 2018 efi rocker cover gasket?Hmmm not sure guys at the shop said they are new ones i also fitted the front seal and put the c2 head onSent from my SM-G570Y using Tapatalk Share this post Link to post Share on other sites
CHESTNUTXE 7,332 Posted March 1, 2018 Hmmm not sure guys at the shop said they are new ones i also fitted the front seal and put the c2 head onSent from my SM-G570Y using TapatalkThe crossy is finishedSent from my SM-G570Y using Tapatalk 1 Outback Jack reacted to this Share this post Link to post Share on other sites
351XD_Fairmont 604 Posted March 1, 2018 Have you got any pictures of removing the old seal from the timing cover? I've been told before how to do it but mines either baked into the cover or I'm just hopeless as it will not come out 2 Outback Jack and CHESTNUTXE reacted to this Share this post Link to post Share on other sites
CHESTNUTXE 7,332 Posted March 1, 2018 Nah just smash it with something round it pops out the back Share this post Link to post Share on other sites
CHESTNUTXE 7,332 Posted March 4, 2018 Nah just smash it with something round it pops out the backIn the gasket set these rope seals came as well i have never done one of these b4Sent from my SM-G570Y using Tapatalk Share this post Link to post Share on other sites
ando76 4,354 Posted March 5, 2018 And why would you be worried about using them? 2 CHESTNUTXE and Outback Jack reacted to this Share this post Link to post Share on other sites
deankxf 20,316 Posted March 5, 2018 did the gasket kit suit several year models? XD to XF ? if so you'd think they'd include the other size rear seal also 2 Outback Jack and CHESTNUTXE reacted to this Share this post Link to post Share on other sites
CHESTNUTXE 7,332 Posted March 5, 2018 Yeah 84 leaded set came with both i just never seen one like this or done one maybe ando can explain how they are fitted Share this post Link to post Share on other sites
ando76 4,354 Posted March 5, 2018 Carefully grab them with one hand - throw them in the nearest bin. Get Felpro 302W Neo seal.  Knock out rope seal retaining spike from cap, install Neo seal as per instructions inside Felpro packet - live happily ever after with an engine that doesn't leak and doesn't have parasitic drag loss from a crap rope seal. THE END 8 Valvebouncer, Defective, CHESTNUTXE and 5 others reacted to this Share this post Link to post Share on other sites
CHESTNUTXE 7,332 Posted March 8, 2018 SOLD ! ITS GOING IN A TRANSIT ICE CREAM TRUCK BAAHAHAAAAAAAAAAAAAAAAA $999 These crossys sell well,lets get another one. 1 Valvebouncer reacted to this Share this post Link to post Share on other sites
SPArKy_Dave 8,892 Posted March 8, 2018 Lol ahha! What's the investment costwise? That's an EFI rocker cover gasket btw... Â 1 CHESTNUTXE reacted to this Share this post Link to post Share on other sites
CHESTNUTXE 7,332 Posted March 8, 2018 Lol ahha! What's the investment costwise? That's an EFI rocker cover gasket btw... Â Yeah i put the cork one on todaySent from my SM-G570Y using Tapatalk Share this post Link to post Share on other sites
CHESTNUTXE 7,332 Posted March 9, 2018 dave it owed me $641 all up ,so the profit was all the hours spent cleaning and painting ect and assembly,but its cool just need another one now but i dont like paying anymore than $100 for a rebuilder . Share this post Link to post Share on other sites
Defective 1,692 Posted March 10, 2018 Il have maybe two unwanted crossflows to get rid of haha...definitely one anyway. Mine wouldnt cost you anything like $100 either. (I thought that's what a decent runner was worth these days haha) 1 CHESTNUTXE reacted to this Share this post Link to post Share on other sites
CHESTNUTXE 7,332 Posted March 10, 2018 ok send pm if you want ? what vintage are they ? Share this post Link to post Share on other sites
CHESTNUTXE 7,332 Posted March 11, 2018 i found another crossy ol,m8 wants $150 for it 1985 xf carby engine complete long motor 117,000km he reckons,i will grab it on thursday if it doesnt sell. 1 deankxf reacted to this Share this post Link to post Share on other sites