Tyler06 266 Posted February 13, 2016 Afternoon all ☺ Been a very long time since ive been on here. Thought id start a new thread with the new motor going into My 79 TE Cortina Ghia. The crossy is long gone and im going FG barra with T5 now with a twist... Im sick of seeing turbo barra cortys so im going the supercharger route. Number plates still suit my baby then too. Ive got a few photos but progress is slow as i have a Heavy Haulage business and my fleet is demanding haha. I will be running a BA inlet and standard exhaust for the time being but i have enlisted a Ali fabricator who will help me design the new intake for the M122 i am going to be using. This time around i will be tubbing it and a spare motor is being built to withstand the power im pushing for. Anyways pics so far... Sent from my SM-G920I using Tapatalk 7 winton, wagoon, Thom and 4 others reacted to this Share this post Link to post Share on other sites
NZXD 2,328 Posted February 13, 2016 Sounds like a cool project. <br /><br />I see Snort performance do a package for the 4.0 using the bottom of the BBM and a 112 s/c. <br /><br />Picture is off their website and demonstrates the SOHC, but Barra is available. <br /> 2 wagoon and Outback Jack reacted to this Share this post Link to post Share on other sites
Tyler06 266 Posted February 13, 2016 Yeah ive seen their version but im going full custom as i want air to water cooler inbuilt. Sent from my SM-G920I using Tapatalk 2 Outback Jack and wagoon reacted to this Share this post Link to post Share on other sites
NZXD 2,328 Posted February 13, 2016 Yeah ive seen their version but im going full custom as i want air to water cooler inbuilt. Sent from my SM-G920I using Tapatalk I think the system is more for average joe to give there 4.0 a bit of small boost, and yours is going to be full on. Share this post Link to post Share on other sites
Tyler06 266 Posted February 13, 2016 Yeah good point haha Sent from my SM-G920I using Tapatalk Share this post Link to post Share on other sites
NZXD 2,328 Posted February 13, 2016 Yeah good point haha Sent from my SM-G920I using Tapatalk I made some enquiries and the one shown can run with the standard exhaust and fuel system with low low boost, still need to get a J3 or similar chip for the ECU, however the best gains were with supporting mods...headers, exhaust, bigger injectors and higher flowing pump etc with those mods I was I informed the AU was good for 210-200rwkw. The manifold and charger was $4k plus supporting mods. 1 Outback Jack reacted to this Share this post Link to post Share on other sites
Tyler06 266 Posted February 13, 2016 As of an hour ago i found a brand new in the box M122 for $1000 so thats a great start haha and its only a couple of hours away. He also has a k frame for my FG which the ex bro in law stole and crashed. He is now in melbourne i hear lol but thats another story. Got a corty lined up to go in to the fabricator that already has an FG barra sitting in it. This way i can do all the stuff i need to to mine and then its a bolt on mani etc 2 NZXD and Outback Jack reacted to this Share this post Link to post Share on other sites
Tyler06 266 Posted February 13, 2016 I think ive talked myself into a T56 today too but i need to find out if there is a shorter extension housing like we use from a mustang on the T5.... Sent from my SM-G920I using Tapatalk Share this post Link to post Share on other sites
PRO250 1,506 Posted February 13, 2016 Cats out of the bag good to seeblown and 6cyl in WA I can put 2 and 2 together its going to be nuts 1 NZXD reacted to this Share this post Link to post Share on other sites
Outback Jack 6,352 Posted February 13, 2016 Blower looks like a plan. Sorry about ya FG. Best of luck with the mods. Jack. Sent from my GT-S7583T using Tapatalk Share this post Link to post Share on other sites
MNTL.XD 3,831 Posted February 14, 2016 Good shit!! This should be good. I don't really (read yes i do) want to be a bad influence on your thought process but.... with the supercharger that side of the engine, the bay looks quite full and looks VERY empty where we're all used to seeing a turbo. Turbos have been done, superchargers have been done, you said you wanted to be different, set the challenge into place early to do both!! Hehe Just add $20,000 to the budget. lol. 1 NZXD reacted to this Share this post Link to post Share on other sites
LJDB 103 Posted February 14, 2016 did it go straight in with the fg sump? if so i can fg conversions coming out everywhere Share this post Link to post Share on other sites
sleepisforthedead 29 Posted February 26, 2016 I think ive talked myself into a T56 today too but i need to find out if there is a shorter extension housing like we use from a mustang on the T5.... Sent from my SM-G920I using Tapatalk TR6060 from a VE SS Sent from my iPad using Tapatalk Share this post Link to post Share on other sites
Tyler06 266 Posted February 27, 2016 did it go straight in with the fg sump? if so i can fg conversions coming out everywhere Minor cut and shut but a $200 mod thats well worth it as the dipstick is at the back the same as corty xflow Sent from my SM-G920I using Tapatalk Share this post Link to post Share on other sites
Tyler06 266 Posted February 27, 2016 I think ive talked myself into a T56 today too but i need to find out if there is a shorter extension housing like we use from a mustang on the T5.... Sent from my SM-G920I using Tapatalk TR6060 from a VE SS Sent from my iPad using Tapatalk Have to go to a wreckers and measure one up... Sent from my SM-G920I using Tapatalk Share this post Link to post Share on other sites
Tyler06 266 Posted February 27, 2016 Good shit!! This should be good. I don't really (read yes i do) want to be a bad influence on your thought process but.... with the supercharger that side of the engine, the bay looks quite full and looks VERY empty where we're all used to seeing a turbo. Turbos have been done, superchargers have been done, you said you wanted to be different, set the challenge into place early to do both!! Hehe Just add $20,000 to the budget. lol. Yeah ill be happy with the charger lol Sent from my SM-G920I using Tapatalk 1 MNTL.XD reacted to this Share this post Link to post Share on other sites
sleepisforthedead 29 Posted February 27, 2016 I think ive talked myself into a T56 today too but i need to find out if there is a shorter extension housing like we use from a mustang on the T5.... Sent from my SM-G920I using Tapatalk TR6060 from a VE SS Sent from my iPad using Tapatalk Have to go to a wreckers and measure one up... Sent from my SM-G920I using Tapatalk I've got one in my garage, I'll measure it next time I'm home from work Share this post Link to post Share on other sites
Tyler06 266 Posted February 27, 2016 That would be awesome cheers Sent from my SM-G920I using Tapatalk Share this post Link to post Share on other sites
deankxf 20,288 Posted February 27, 2016 I think ive talked myself into a T56 today too but i need to find out if there is a shorter extension housing like we use from a mustang on the T5.... Sent from my SM-G920I using Tapatalk there are kits for the shifter relocation, theres a pic of one done in the link below. extension housing stays same though.. http://www.trifive.com/forums/showpost.php?p=1056000&postcount=13 Share this post Link to post Share on other sites
winton 399 Posted February 27, 2016 ^^^ tri five c tranny. Hmmm do I open or not. Share this post Link to post Share on other sites
Tyler06 266 Posted April 3, 2016 I think ive talked myself into a T56 today too but i need to find out if there is a shorter extension housing like we use from a mustang on the T5.... Sent from my SM-G920I using Tapatalk there are kits for the shifter relocation, theres a pic of one done in the link below. extension housing stays same though.. http://www.trifive.com/forums/showpost.php?p=1056000&postcount=13 Thanks mate looks the way ill go. Keep my 4.11s then too haha Sent from my SM-G920I using Tapatalk Share this post Link to post Share on other sites
Tyler06 266 Posted September 21, 2016 So finally an update. My plans for the M112 fizzled due to the size and wanting to keep it all under the bonnet. Sooo... ive been hard in to it the last 2 days getting her setup as a turbo. Bloody not easy with alot of trial and error. Grinder has had a work out today and i actually had to notch the strut tower to fit the turbo. Will get the whole thing fitted out with piping and the new plenum and precision billet turbo than ill redo the engine bay haha. 3rd time better be the last time. Already sorted is a new precision billet turbo, 1000cc injectors, surge tank with all supporting lines pumps etc to suit E85, built BTR auto, 3inch system, standalone harness and other bits and bobs. My tuner reckons ill hit 500rwhp with the gear i have, so im looking for 10s 1 dougie77 reacted to this Share this post Link to post Share on other sites