-
Content Count
48 -
Joined
-
Last visited
About sleepisforthedead
-
Rank
Newbie
-
rear adjustable coilover
sleepisforthedead replied to Drew442's topic in Steering, Suspension and Brakes
I spoke to the guys from Viking while I was at SEMA and they recommended the Warrior valve upgrade, something about infinitely adjustable and easily rebuildable if I remember correctly -
rear adjustable coilover
sleepisforthedead replied to Drew442's topic in Steering, Suspension and Brakes
Did you get the Warrior valve upgrade with yours Rob? -
XYZ. XR-XF Falcon Front Coilovers
sleepisforthedead replied to Ivanflo's topic in Steering, Suspension and Brakes
Cheers I'll have to give them a call during the week -
400 block is not the same, has extra length on top
-
XYZ. XR-XF Falcon Front Coilovers
sleepisforthedead replied to Ivanflo's topic in Steering, Suspension and Brakes
They look mint.. same as the Fox coil overs in my Ranger nearly. Where did you get them from? Wouldn't mind something other than the same old 90/10s and custom springs in mine -
Yeah I've seen his stuff before, doesn't really interest me to build as I've already got an Arrow 427 in progress. I don't need two endless money pits hahaha Heads are 2V open chambers I'm pretty sure, only casting number I can see is 25HO and a couple of the old round date/time stamps
-
Here's the block, looks dirty but the bores are coated in grease for storage haha. Standard sized bore, 400 cast into the valley, I think it's a Michigan block from memory? Rods, crank, pistons etc are all there. What do you think it would be worth? Owes me $2k including the C6 so I'd be happy if I could get that
-
I'll have a look tomorrow. Probably should sell it, need to get my XD finished and it needs as much shed space as possible hahaha
-
Honestly I've never checked. Got it in a parts deal, roughly measured the bore make sure it was standard and packed it away.
-
I've got one with a C6 bell housing pattern, well I assume so as it came with a C6 hahaha
-
I've got a 400 Cleveland in the shed, standard bore too. Don't know if you could classify it as a big block but they're bigger than our blocks haha
-
sleepisforthedead started following FORD BIG BLOCKS
-
I've got one in my garage, I'll measure it next time I'm home from work
-
TR6060 from a VE SS Sent from my iPad using Tapatalk
-
I like this mish-mash of Borg Warner stuff.. would you be able to tell us the distance from face to face with the discs on there, and what's the centre to centre measurement on the spring pads? Currently tossing up whether to go Hilux or Borg Warner diff in my '92 Courier (want five stud) Sent from my iPad using Tapatalk