EgoXF

Thanks for the awesome advice guys! it's easy to see what we have done wrong, but I guess you have to learn the hard way too get anywhere in life!
 
Also, just realized I posted this in the wrong section, oops

ok simple use compressed air or a gerni to remove the loose paint ,
 
its not just plasty primer you need ,
1, plastic primer should only be applied to clean plastic ,with no other contaminates you dont rub it you dont prime over it.
2, after cleaning crap off bar ,plastic parts ,give 2 light coats of plastic primer.
3, you need to buy ELASTIC ADDITIVE ,YOU ADD AROUND 2 /3 mils TO YOU COLOUR ,WHAT THIS DOES IS ALLOW THE PAINT stretch and shrink when it drys ,
whats happened here is ,the plastic got hot stretched ,and when it contracted the paint being brittle just cracked ,simple
 
4. also if you clear over the base ,add elastic to the clear as well

beautiful, was just about to start a topic about this. i need to do something about my ride, it rides over bumps and then bounces down the road like a boat in choppy water! great when you have a busty girl in the passenger seat though

My gosh must be something they are putting in the chicken these days. I think we need some photos in this thread. Pictures of the springs or envys 16 year old? anyone????

hahaha, she's 16 so im not going to give you any pics, but shes blonde and has double d's so you can imagine the rest haha 

16 with DDs???   my imagination is going overboard

OK so I have got the wagon springs out and flipped the bottom leaf as per the instructions in the suspension section. Drew it out on the ground and there is a 2.5inch difference after the flip. The ute comes off the trailer tomorrow for the spring swap. I've measured the mounting point on the EF and it this stage it looks the same as XF. Final measurements will be done tomorrow.
 
envyxf I will not be able to tell you what difference it makes to ride quality as my ute is built for one purpose which means I can not legally drive it on the road. I so want to but I reckon I'd get two blocks before someone complained.
 
Stay tuned for result of this experiment. I seriously hope I haven't induced axle tramp, but I think the flipped bottom spring will stop this and conversation with my local suspension guru have confirmed this.

This would no doubt take a tremendous amount of talent to do all at once so I commend you.

Nope spot on.
 
Yeah door trim off for the removal of the door mirror.