AussieSpeed 9 Posted May 11, 2013 I have been working away trying to design more products to get every one going that bit faster, thanks to all of our supporters who have helped us get te Aussiespeed range out there. The time has come for us to have some fun with our products as we move forward with our range of supercharger kits for inline engines. we have had many set backs along the way but are still wrking on them. We have our crossflow powered 1964 Anglia being fitted up with our kit plus we just purchased a OHC 4.0 litre Falcon ute that will be fitted with a carb, then a wiff of gas will be added and if we can do it without a blowing it up before had bolting our new blower kit on the well used and flogged 4.0 engine. We will have a page going up on the Aussiespeed website following the build but this is what we are starting with.. 1 robbie reacted to this Share this post Link to post Share on other sites
Defective 1,692 Posted May 11, 2013 Will the blower kit suit carb or efi? Share this post Link to post Share on other sites
AussieSpeed 9 Posted May 11, 2013 carb there is already efi stuff on the market 1 'Nova reacted to this Share this post Link to post Share on other sites
351XD_Fairmont 604 Posted May 11, 2013 I take it the kits will be centrifugal superchargers so as to keep them nice and tidy under the bonnet? Share this post Link to post Share on other sites
AussieSpeed 9 Posted May 11, 2013 Nah mate like John Holmes in Speedo's hanging out the top.. 6 Tyler06, czy383, XES and 3 others reacted to this Share this post Link to post Share on other sites
dizzy616 183 Posted May 11, 2013 Nah mate like John Holmes in Speedo's hanging out the top.. fark yeh Share this post Link to post Share on other sites
Tyler06 266 Posted May 11, 2013 Nah mate like John Holmes in Speedo's hanging out the top.. Lol Share this post Link to post Share on other sites
steve mcqueen 1,796 Posted May 11, 2013 Hey Aussie, tell us more about the Anglia, got a link to a build thread? I checked your website but couldn't find anything. 1 'Nova reacted to this Share this post Link to post Share on other sites
AussieSpeed 9 Posted May 12, 2013 Here is the build on the Anglia, the car is being built in Victoria by Ron at Kustom Bitz its a joint venture as i found the car in Adelaide a few years ago. It was powered by a Hemi 6 when we got it but is now set up for a crossflow to run any combo. The link is below. http://www.kustombitz.com.au/c/4384260/1/ford-anglia-105e-gasser-drag-car.html Share this post Link to post Share on other sites
