bear351c 10,273 Posted June 20, 2016 I know a guy who can do tubs........... Share this post Link to post Share on other sites
2redrovers 21,402 Posted June 20, 2016 Hmmmmmmmm and who be this wizard of metals ye speak of? Share this post Link to post Share on other sites
bear351c 10,273 Posted June 20, 2016 Always had a weird idea, of cutting the roof off an FC LTD. Need to crop the windscreen down about 5 inches, raise the door about the same to match the height of the rear quarter to the front guard, move the door jamb back 3 or 400 mm, maybe even find some XA 1/4 vent windows. Not much good with photoshop, even worse with panel beating. But, if i had some spare time and a few grand to play with........who knows.?? Share this post Link to post Share on other sites
2redrovers 21,402 Posted June 20, 2016 With a nice high end interior job and it's a stylish cruiser in the topless galaxy vibe. 1 bear351c reacted to this Share this post Link to post Share on other sites
bear351c 10,273 Posted June 20, 2016 Yep, something like that would be nice. Share this post Link to post Share on other sites
bear351c 10,273 Posted June 21, 2016 Hey Rod, anyone you know used the '69 Mustang repro parts to fix the cowl on an XA,B,C.?? http://sydneymustangparts.com.au/index.php?_a=viewProd&productId=7301 Share this post Link to post Share on other sites
2redrovers 21,402 Posted June 21, 2016 Haven't heard of anyone trying but when you look at the parts, they are very similar to look at. Might not be correct dimensions but it could be worth the gamble for 140 bucks. 1 bear351c reacted to this Share this post Link to post Share on other sites
2redrovers 21,402 Posted June 21, 2016 Here ya go bear, this what you had in mind? 6 Thom, SirkWhyXF, deankxf and 3 others reacted to this Share this post Link to post Share on other sites
NZXD 2,328 Posted June 21, 2016 Here ya go bear, this what you had in mind? Your photo shop skills are bloody good. Sent from my iPad using Tapatalk 1 2redrovers reacted to this Share this post Link to post Share on other sites
NZXD 2,328 Posted June 21, 2016 Any chance you could try and put these wheels into my XD. I am going to order them, just unsure of the centre colour. Not the hot wires though. I am leaning towards the gun metal grey centre...I'm thinking the gold might be a bit to much against the car. Cheers. 1 SirkWhyXF reacted to this Share this post Link to post Share on other sites
2redrovers 21,402 Posted June 21, 2016 I'll give it a shot. See if I can do something tonight maybe. 1 NZXD reacted to this Share this post Link to post Share on other sites
bear351c 10,273 Posted June 22, 2016 Oooohhh yeah...... YOU ROCK. ! 1 2redrovers reacted to this Share this post Link to post Share on other sites
SirkWhyXF 1,533 Posted June 22, 2016 Any chance you could try and put these wheels into my XD. I am going to order them, just unsure of the centre colour. Not the hot wires though. I am leaning towards the gun metal grey centre...I'm thinking the gold might be a bit to much against the car. Cheers. Sweeeet dude, I would have bought a set of these myself if they'd have been available before I bought my Simmons. The gunmetal will look great with your car I reckon. They're 17's yes? Shame your so far away too I'd buy your convos off you, if you where even planing on offloading them. Share this post Link to post Share on other sites
NZXD 2,328 Posted June 22, 2016 Any chance you could try and put these wheels into my XD. I am going to order them, just unsure of the centre colour. Not the hot wires though. I am leaning towards the gun metal grey centre...I'm thinking the gold might be a bit to much against the car. Cheers. Sweeeet dude, I would have bought a set of these myself if they'd have been available before I bought my Simmons. The gunmetal will look great with your car I reckon. They're 17's yes? Shame your so far away too I'd buy your convos off you, if you where even planing on offloading them. Yeah mate 17x10 and 17x8s. I'm in Alice Springs, car is in NZ haha but will be here soonish fingers crossed, I've got the documents sorted from NZ and now can re apply for the permit to bring it in, under pre 1989 vehicle... 1 SLO247 reacted to this Share this post Link to post Share on other sites
2redrovers 21,402 Posted June 22, 2016 Ok here we go, I think it's a little iffy as far as my chop goes but hopefully it gives you an idea. I made the gold wheels deep dish and the dark ones as per the sample. Tried getting better quality pic of the wheels from their website but it's down. 2 NZXD and Thom reacted to this Share this post Link to post Share on other sites
SirkWhyXF 1,533 Posted June 23, 2016 Yeah mate 17x10 and 17x8s. I'm in Alice Springs, car is in NZ haha but will be here soonish fingers crossed, I've got the documents sorted from NZ and now can re apply for the permit to bring it in, under pre 1989 vehicle... Yeah hope you get that all sorted soon. Bloody Aussie red tape! Share this post Link to post Share on other sites
NZXD 2,328 Posted June 23, 2016 Ok here we go, I think it's a little iffy as far as my chop goes but hopefully it gives you an idea. I made the gold wheels deep dish and the dark ones as per the sample. Tried getting better quality pic of the wheels from their website but it's down. Thanks man, I think personally the Gold doesn't suit as it would if the car was a bright red and the grey will be the go to match the soft colour of the car. Definitely be a bit of dish on the back with 10s. Share this post Link to post Share on other sites
gerg 10,871 Posted June 23, 2016 I like the gold on burgundy, sort of reminds me of the Bond Lotus Esprit in For Your Eyes Only (but that was copper) Share this post Link to post Share on other sites
NZXD 2,328 Posted June 23, 2016 I like the gold on burgundy, sort of reminds me of the Bond Lotus Esprit in For Your Eyes Only (but that was copper) Here is the actual gold in 17 inch on an XD ute in blue. 2 SirkWhyXF and gerg reacted to this Share this post Link to post Share on other sites
2redrovers 21,402 Posted June 23, 2016 I had another shot at the wheels using the ones off that ute. The grey wheels are my not so flash attempt at changing the gold ones to something like the right colour. Personally, I kinda like the gold ones but agree they would look different in real life. Depends what impact you are aiming for, your car after all. 2 steve mcqueen and NZXD reacted to this Share this post Link to post Share on other sites
NZXD 2,328 Posted June 23, 2016 I had another shot at the wheels using the ones off that ute. The grey wheels are my not so flash attempt at changing the gold ones to something like the right colour. Personally, I kinda like the gold ones but agree they would look different in real life. Depends what impact you are aiming for, your car after all. You have done bloody well, I think the gold (even though a picture) looks fair better than I imagined, I like it a lot. Cheers 2 2redrovers and Thom reacted to this Share this post Link to post Share on other sites
SirkWhyXF 1,533 Posted June 23, 2016 Yeah the gold does look quite good on the burgundy. 2 NZXD and steve mcqueen reacted to this Share this post Link to post Share on other sites
NZXD 2,328 Posted June 23, 2016 The more I look at the gold the more I like it. 1 steve mcqueen reacted to this Share this post Link to post Share on other sites
2redrovers 21,402 Posted June 23, 2016 Burgundy is a colour that can usually carry gold but does depend on the value of each ie how light or dark. I think the combo manages to be classy and mean/tough at same time. The darker ones will look good too but wouldn't grab your eye as much. Could be a good or bad thing depending how you view it. More or less attention. 1 NZXD reacted to this Share this post Link to post Share on other sites
NZXD 2,328 Posted June 23, 2016 The colour is Ford BF Seduce, which on such a boxy car looks slightly different to what it looks like on the BF. Share this post Link to post Share on other sites