CHESTNUTXE 7,363 Posted April 3, 2016 yep i cant work it out,im taking it to eddy the expert tomorrow morn ,what ever it is it wont budge,but its soft ????? a bloke not far from here worked on the engine assembly line in the xd era ,i will ask him,i also did a fare bit more today in the engine bay assembling the alt and p/s gear,carby and fuel lines and heater hoses,will continue on tomorrow. Share this post Link to post Share on other sites
CHESTNUTXE 7,363 Posted April 4, 2016 The clevo is almost done,just waiting for the tailshaft to come back,add tranny fluid and start the fooker. 2 MNTL.XD and Free.51 reacted to this Share this post Link to post Share on other sites
hendrixhc 10,921 Posted April 4, 2016 did the expert look at your dizzy today? Share this post Link to post Share on other sites
CHESTNUTXE 7,363 Posted April 4, 2016 ha ha  yes it turns out my mate who helps me put the motor in broke the vaccum tree and instead of telling me he shoved it in the end of the dizzy with the rubber block off ,it was wedged in so hard,the bloke at the machine shop was laughing his ass off,it goes in fine now,and timing is set at 10 deg ,first start coming soon. Share this post Link to post Share on other sites
hendrixhc 10,921 Posted April 4, 2016 Consequently not your mate anymore? 2 Outback Jack and bear351c reacted to this Share this post Link to post Share on other sites
bear351c 10,273 Posted April 4, 2016 Â Â Â Â Â 1 Outback Jack reacted to this Share this post Link to post Share on other sites
CHESTNUTXE 7,363 Posted April 5, 2016 Guys help i tried to start it but its backfiring thru the carb ,do you think ive got it on the wrong stroke ? or how much timing should be at the balancer on number 1 when the motor is not running,any other theries please. Share this post Link to post Share on other sites
bear351c 10,273 Posted April 5, 2016 Check your firing order? 13726548 (I think) Â anti clockwise. dizzy out 180*,? igniton leads on wrong plug? Â Balancer should be at approx 10 degrees, No.1 TDC, compression stroke. 1 gerg reacted to this Share this post Link to post Share on other sites
CHESTNUTXE 7,363 Posted April 5, 2016 ok firing order is correct,10 deg is what i have,with the compression and exhaust stroke is it all in 360 deg or 1 turn of the balancer or is it 2 turns ? i obviously have got it out of sync with the correct stroke,so please correct me if wrong do i pull the dizzy and rotate the engine another full turn or only 180 deg ? Share this post Link to post Share on other sites
Thom 6,654 Posted April 5, 2016 Pull the dizzy an turn it 180 degrees 1 Outback Jack reacted to this Share this post Link to post Share on other sites
gerg 10,871 Posted April 5, 2016 Pull #1 plug and turn motor till you feel compression on the plug hole with a finger over it, then you know. Failing that, pull the left rocker cover and watch #6 rocking. 1 Outback Jack reacted to this Share this post Link to post Share on other sites
CHESTNUTXE 7,363 Posted April 5, 2016 ok i see so 2 turns of the crank is 1 turn of the dizzy,right ? Share this post Link to post Share on other sites
Thom 6,654 Posted April 5, 2016 Correct 1 Outback Jack reacted to this Share this post Link to post Share on other sites
CHESTNUTXE 7,363 Posted April 5, 2016 ok thanks i will swap it all around in the morning,this afo when i cranked it with out the plugs in it i was so excited it all worked ,i bought a small bottle of comp cams run in additive . Share this post Link to post Share on other sites
CHESTNUTXE 7,363 Posted April 6, 2016 ITS ALIVE ITS ALIVE AND IT CRACKS OFF THE THROTTLE ,RUNNING THE CAM IN NOW !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!.Thanks THOM. 3 gerg, Jestr75 and MNTL.XD reacted to this Share this post Link to post Share on other sites
MNTL.XD 3,831 Posted April 6, 2016 Awesome!! Need a vid of it, need to hear that crack! Love the sound of a Clevo! Share this post Link to post Share on other sites
CHESTNUTXE 7,363 Posted April 6, 2016 yeah i have a short one,smoke everywhere from burning the paint,no exhaust.i will work out how to load it in here. Share this post Link to post Share on other sites
CHESTNUTXE 7,363 Posted April 6, 2016 it wont let me post the video thru photobuket Share this post Link to post Share on other sites
CHESTNUTXE 7,363 Posted April 7, 2016 ok i took it for a drive around the block it seems to be ok,tuesday is booked in for a 3 inch single system,with a hooker aero chamber stainless muffler i had. 4 gerg, the ford fan, SMIKXF / YEABRA and 1 other reacted to this Share this post Link to post Share on other sites
Free.51 2,740 Posted April 7, 2016 Looks good mate, cant wait to hear it. Share this post Link to post Share on other sites
MNTL.XD 3,831 Posted April 7, 2016 Upload it to youtube then post the URL directly onto here. Fuck photobucket for vids. Single 3" with hooker will sound tough, driving it to the exhaust joint straight out the extractors nice and early in the morning is one of the best drives you'll ever have too!! lol. 2 bear351c and NZXD reacted to this Share this post Link to post Share on other sites
bear351c 10,273 Posted April 7, 2016 Yep, ^ ^ ^  dont ask me how I know.......... 1 MNTL.XD reacted to this Share this post Link to post Share on other sites
Free.51 2,740 Posted April 8, 2016 Im guilty too 1 MNTL.XD reacted to this Share this post Link to post Share on other sites
CHESTNUTXE 7,363 Posted April 8, 2016 I uploaded it to you tube,its just a start I did today for a few minutes,I'm not sure how good it will be,my first ever upload if it worked. Share this post Link to post Share on other sites
Free.51 2,740 Posted April 8, 2016 Whats the vid title? Share this post Link to post Share on other sites