Leaderboard
Popular Content
Showing content with the highest reputation on 07/18/2022 in all areas
-
1 pointFor 6 cylinder. Xa xb 3 speed manual bellhousing had hydraulic clutch, center can be opened up 4mm to fit single rail or t5 and have hydraulic clutch as opposed to cable. Use release bearing arm from 3speed bellhousing. Also needs upper rh hole redrilled to mount gearbox. Will add photo of bw35 next time i go outside.
-
1 pointI have been busy working away on the interior of the Darkside Garage Inc. Millennium Falcon Longreach. Still heaps to do.
-
1 point
-
1 pointall Ford Day Geelong 2022, Fair to say i have modified the interior
-
1 pointmate of mine got his XG running again today(Blown T5 box) has fitted his spare T5 which was from an XF. pic of the XG gearbox cross member drilled to suit the XF gearbox mount. (bolts loose while it was positioned) naturally swapped the XF bell housing to the XG one, and speedo gear to suit the diff ratio in the XG. i don't recall hearing any other mods needed.
-
1 pointA busy Easter fixing the roof of the Millennium Falcon Longreach. Mounted the Kylo Ren lightsaber, (Red) the Luke Skywalker lightsaber (Green) and Obiwan Kenobe lightsaber (Blue) Used the same hard foam board as a backing but painted black.
-
1 pointPicked up a couple of US army radio boxes from from 1967 to fit in the back of the side boxes.
-
1 point
-
1 pointThe side pods for the back of the van, I will take a photo once I get it in the back tonight.
This leaderboard is set to Melbourne/GMT+10:00