Does anybody know where I can get a knob?   ok, get ya minds out of the gutters......   Does anybody know where I could get a custom gear knob that looks like a 70's falcon 4 speed knob but has the pattern on it to suit a 5 speed gear box?

Has anybody tried out a Holley 4360 economaster on 4.1's? Being only 450 cfm I'd assume that they would be almost right on the money for a mild cammed 4.1.

Hmmmm N2O...now that could be fun...shame its illegal for street use.

If cleaning all the connections doesn't fix it you can try adding a resistor in parallel to the pot to send a bit more power through

When I've restored these dashes, I do the following and the bulbs usually get brighter (well, you can at least sort of see the dash...); - replace and or clean every bulb (they get caked on with dust).  I always use original type bulbs but some new led ones would make a big difference, - make sure that the earth connection is good.  Pull the connector out and check that the tabs are clean (connector is on ds of dash as you look from the steering wheel side).   I wouldn't go mucking around with the wiring...  

i know price is ridiculas,even a cheap n20 kit hooked up for a grand would make just as much power.

Yup 100% agree and its a shame  I always wanted a supercharged 4.1 even as a pimplely teenager on my P's back in the 90's cruising around in my XC.   I have messaged CAPA about this kit to see what sort of pricing, I'd expect around 7 or 8k from them.

Yep the Aussie speed blower kit looks awsome but 10k ,as much power as a e Bay turbo kit for 3k.it ain't worth it

https://www.facebook.com/story.php?story_fbid=pfbid02AXXTMXanBCjFewbJRxNsXg1xcLP9QExupG5k3h46SqxAf3RRphrHxr57937tg4dFl&id=100064832616948 saw this Yesterday, would be very close that what I'd want to do with a turbo. But if the blower could be wound up to 10 psi, it'd probably come close to the power i'd like to have.   Shame CAPA kits are notoriously expensive for the power they produce.   Would be very cool however.

dsm are sydney based seller,yes they are chinese but a 100% copy of the original bosch and all parts are interchangeable,i must have used at least 10 of them over the years and no problems,also you are gunna be changing your dizzy gear to suit the cam anyway to a nice crow or similar,the chinese gear would be the only thing i would be worried about and once its off on goes the better one.