Outback Jack 6,352 Posted February 16, 2015 Crushed satin....................give it a more dracula kind of vibe.......hehe Mate those heads look lovely, can't wait to see all this come together... like a kid in a candy shop.... Jack. Share this post Link to post Share on other sites
ando76 4,354 Posted February 17, 2015 Cheers Jack - I am really happy with the way they look and I am sure that they will excite the flow bench. The mighty clevo is tucked away in the Coffin. I just have to do a few final things and then in with the crushed satin and away. Oh yeah getting a bit excited myself 1 Outback Jack reacted to this Share this post Link to post Share on other sites
gerg 10,871 Posted February 17, 2015 Nice.... And shiny! Any guesses for the flow rates? Closest one gets a case from Ando 2 Outback Jack and ando76 reacted to this Share this post Link to post Share on other sites
wagoon 2,429 Posted February 18, 2015 If I will can I have a coffin instead of the case :-) Share this post Link to post Share on other sites
gerg 10,871 Posted February 18, 2015 Hey whatever floats your boat (or coffin) i guess I reckon 233/178 cfm. 1 NZXD reacted to this Share this post Link to post Share on other sites
wagoon 2,429 Posted February 18, 2015 I have no idea what the flow figures are I just want the clevo in the coffin. So I guess 351 Share this post Link to post Share on other sites
ando76 4,354 Posted February 18, 2015 Gerg I reckon you will be damn close. As long as they accelerate off the bottom I will be happy. Got side tracked today but with the bloody cyclones hovering around up here, I'm not so sure I want the Clevo on a truck to Brisbane just yet. Hmmmm. 1 gerg reacted to this Share this post Link to post Share on other sites
wagoon 2,429 Posted February 18, 2015 No real point putting on a truck as the truck will probably get no further than rocky and have to stop. Safer sitting at your place than on a truck. Never know what truck drivers get up to ;-) Share this post Link to post Share on other sites
ando76 4,354 Posted February 18, 2015 That's what I thought my good man. Share this post Link to post Share on other sites
gerg 10,871 Posted February 20, 2015 How are you travelling up there Ando? Share this post Link to post Share on other sites
ando76 4,354 Posted February 20, 2015 We are fine mate. Cyclone sucked all our rain south. We are about 1000k north of the carnage and enjoying beautiful hot sunny and humid days thanks to all the rain we should be getting heading south. Thanks for your concern. P.S. Coffin is safe in the shed - not sending it to next week now - give the roads time to re-open etc. 2 Outback Jack and gerg reacted to this Share this post Link to post Share on other sites
Trev Vaa 1,185 Posted February 24, 2015 my 2vs flow 245/200 @.600 i've got standard intake valves, but 1.71" exhaust valves. CHI 2vs on the same bench flow 300 with some tidy up work done. 1 Outback Jack reacted to this Share this post Link to post Share on other sites
ando76 4,354 Posted February 24, 2015 Nice flow there mate. We got above 230 with a much smaller valve on THOR's (x flow) heads. I'm hoping with the 2.060 inlet, these will be 240 or above. Anything has gotta be better than what they were stock and as long as there is really good low lift gains I will be stoked. 1 Outback Jack reacted to this Share this post Link to post Share on other sites
gerg 10,871 Posted February 24, 2015 Making me want to whip my 2Vs off and give them a tickle... Damn you Ando! Share this post Link to post Share on other sites
Trev Vaa 1,185 Posted February 25, 2015 Nice flow there mate. We got above 230 with a much smaller valve on THOR's (x flow) heads. I'm hoping with the 2.060 inlet, these will be 240 or above. Anything has gotta be better than what they were stock and as long as there is really good low lift gains I will be stoked. yep low lift high flow is where it's at .400" 230/160 i'm still unsure whether i'm going to put a hyd roller or solid roller in mine, it'll be fairly mild either way... no point going big cam on these heads, alloys it definitely would. 1 gerg reacted to this Share this post Link to post Share on other sites
Thom 6,654 Posted February 25, 2015 I'd go hydraulic roller, we just did recently with dad's car as it shit another set of solid rollers, the just don't live on the street, this set lasted the longest though at 30,000ks 1 Trev Vaa reacted to this Share this post Link to post Share on other sites
gerg 10,871 Posted February 25, 2015 yep low lift high flow is where it's at .400" 230/160 Love that philosophy... Ford did the same with 4Vs back in the day. Good flowing heads need less cam for the same horsepower and that means you don't need all the big name valve gear to keep it all together. You can't cam it up too much anyway otherwise you go backwards, especially down low. Share this post Link to post Share on other sites
ando76 4,354 Posted February 26, 2015 I'd go hydraulic roller, we just did recently with dad's car as it shit another set of solid rollers, the just don't live on the street, this set lasted the longest though at 30,000ks Have you tried a set of Isky 'Red Zone' solid roller lifter?? They don't run needle roller bearings like the comp etc. units and seem to be more durable if you believe everything you read. I bought a set ($854 US) when the dollar was good to go in my roller cam crossy but I still haven't built that so I am unsure how they go. Share this post Link to post Share on other sites
ando76 4,354 Posted February 26, 2015 XC - They sound like great heads - Can't wait to get mine back and onto the bench. I'm all but finished packing the coffin and I think it has settled enough now after the cyclone that freight should be just about back to normal. Might get it sent off tomorrow instead of playing on my, oops my boys buggy. 1 Trev Vaa reacted to this Share this post Link to post Share on other sites
Thom 6,654 Posted February 26, 2015 I'd go hydraulic roller, we just did recently with dad's car as it shit another set of solid rollers, the just don't live on the street, this set lasted the longest though at 30,000ks Have you tried a set of Isky 'Red Zone' solid roller lifter?? They don't run needle roller bearings like the comp etc. units and seem to be more durable if you believe everything you read. I bought a set ($854 US) when the dollar was good to go in my roller cam crossy but I still haven't built that so I am unsure how they go. Seen some pretty nasty failures of those lifters, I don't know what they are like now but around 2-3 years ago they had an issue with the bronze bush not being heat treated properly and then failing, the other downfall was because they don't run a bearing just a bush when they do fail you can't hear it until the damage has been done, then say hello to a rebuild because the engine is full of metal Share this post Link to post Share on other sites
blu xe 825 Posted February 26, 2015 I think everyone gets all too keen to chase the big HP numbers and forgets that you still need big bucket loads of torque to get things moving. More so when you shifting a heavier car from standstill in a hurry! Kosteki had some interesting reading on their website before they closed shop with 20 different clevo combo's. The first 10 were some pretty basic combo's and highlighted the difference between a good torquey motor compared to one that made the power but not as much torque and explained how in real life driving how much quicker the stump puller ones would have been plus how much nicer manners it would have. 3 ando76, gerg and Outback Jack reacted to this Share this post Link to post Share on other sites
ando76 4,354 Posted February 26, 2015 Yep exactly - this thing should be a torque monster - just the way I like them. When I try and explain to people what torque feels like I end up shutting up and just getting them to ride my old Honda XR600. tractor like torque and just pull another gear. Thing is those old XR600 motors will still rev past that fat torque zone. Great engine those things. Peaky horsepower explanation - any two stroke motorcross bike. LOL. 2 Outback Jack and gerg reacted to this Share this post Link to post Share on other sites
gerg 10,871 Posted February 26, 2015 Peaky horsepower explanation - any two stroke motorcross bike. LOL. Or any Honda car ever made... VTEC or not. Dead and characterless unless they're screaming their tits off. Share this post Link to post Share on other sites
wagoon 2,429 Posted February 26, 2015 Or any Honda car ever made... VTEC or not. Dead and characterless unless they're screaming their tits off. throw rotaries into that list 1 Outback Jack reacted to this Share this post Link to post Share on other sites
gerg 10,871 Posted February 26, 2015 I dunno, never owned a rota, they seem peaky but in a ridiculous kind of way, i reckon they might be fun... maybe only for a while. Share this post Link to post Share on other sites