SirkWhyXF 1,533 Posted December 17, 2016 Yes very nice mate, only thing I would change is a bit more low in the rear. Did you diy the strips, you can see overlap in the close up, neat though. Very nice work if so, was thinking of having a go with some cheap pinstriping tape on my xf. Share this post Link to post Share on other sites
Jestr75 41 Posted December 17, 2016 Yes very nice mate, only thing I would change is a bit more low in the rear. Did you diy the strips, you can see overlap in the close up, neat though. Very nice work if so, was thinking of having a go with some cheap pinstriping tape on my xf. Yep, Agree the rear needs to come down, That is on the list after i change the diff gears. No I didn't do the stripes, they were on it when I got it. Share this post Link to post Share on other sites
SLO247 1,713 Posted December 17, 2016 Very nice, thanks for the pics. Same interior as mine had. Share this post Link to post Share on other sites
SPArKy_Dave 8,892 Posted December 17, 2016 Nice! Is it factory manual? What wheels was it optioned with - steelies or the Volantes? Going to put the aircon back on it, with the V8? Edit - why does it have an aircon evap, but a non-aircon climate control bezel? 1 FOMOCOHO reacted to this Share this post Link to post Share on other sites
FOMOCOHO 882 Posted December 18, 2016 Nice! Is it factory manual? What wheels was it optioned with - steelies or the Volantes? Going to put the aircon back on it, with the V8? Edit - why does it have an aircon evap, but a non-aircon climate control bezel? So observant dAVE !!! 1 SPArKy_Dave reacted to this Share this post Link to post Share on other sites
Jestr75 41 Posted December 18, 2016 Yep factory 4 on the floor, 4.1 alloy head. Not sure what wheels it was optioned with but had steelies when i got it. Not going to re-install aircon at the moment. It had aircon set up on tbe 6 cylinder when i got it. As for the air con bezel, your guess is as good as mine. Share this post Link to post Share on other sites