Free.51 2,727 Posted February 7, 2016 Hi all as title says front pass window not working, noticed it on Friday so decided to investigate today the loom has power & I disconnected the elec motor plug put power to it from a battery & wires & window goes up & down fine I even used multiple sets of window switches thinking it might be a faulty switch but still no go i did the same on the drivers window switches too but nothing any ideas? dirty connection maybe? Share this post Link to post Share on other sites
bear351c 10,273 Posted February 7, 2016 Got power at the switch, coming from the loom? Nothing wrong with the elec motor if it works with direct power. 1 Outback Jack reacted to this Share this post Link to post Share on other sites
Free.51 2,727 Posted February 7, 2016 Yeah I put test light on the pin of the loom when I unplugged it from the actual switch & it lit up Share this post Link to post Share on other sites
Free.51 2,727 Posted February 7, 2016 Or do u mean test it with the switch plugged into the loom still? (I haven't tried that). Would the fault be at the drivers side switch for the pass.window or passenger side cos neither are working . Share this post Link to post Share on other sites
user272 526 Posted February 7, 2016 Pretty sure that the drivers side switch needs to be hooked up for any of the other windows to work so if its a switch it probably could be either. I had to pull mine apart and clean them once. Do they work off a relay? There are 2 in the passenger door of my car but didn't look at what they did. hope this answer makes sense or at least gives you some ideas. for some reason I seem to have decided to lie awake all night tonight so I'm running a touch slow 1 Outback Jack reacted to this Share this post Link to post Share on other sites
Free.51 2,727 Posted February 7, 2016 Might just unplug them & clean the pins on driver/passenger switches & see what happens Share this post Link to post Share on other sites
Free.51 2,727 Posted February 8, 2016 Well I rechecked everything & the passenger side loom for the window has no power but drivers side does so what do I do now Share this post Link to post Share on other sites