Xd/E Arm Rest Bolt Size

[Damo 15]

Howdy,

 

I was lucky enough to pick up some Xe door cards and armrests but they didn't come with screws/bolts

And I am unsure on the proper size and length for armrests, can anyone help

On this?

 

Cheers

Damo

[SPArKy_Dave 8,894]

Not sure if they're the same, but you could try the XR-XY screws -

http://www.gtshop.com.au/product/clips--screws--bolts--brackets_25/xr---xy-armrest-screw-kit/?&?product_variant_id=2123

[deankxf 20,328]

Howdy,

 

I was lucky enough to pick up some Xe door cards and armrests but they didn't come with screws/bolts

And I am unsure on the proper size and length for armrests, can anyone help

On this?

 

Cheers

Damo

they are self tappers, thickest ones i have seen with a phillps head on them about an inch long for the 2 main ones. the one near the handle is small and short.

 

they go into a plastic thingy in the door from memory, are these going onto XF doors(wont have the plastic whatsit doover if so)

[Damo 15]

Cheers guys, no they are going onto XE doors Dean..... that gives me something to work with.

 

Cheers

[SPArKy_Dave 8,894]

Cheers guys, no they are going onto XE doors Dean..... that gives me something to work with.

 

Cheers

 

Try these too -

 

http://www.xbfordfalconshop.com/products/Armrest-screw-set-%282%29.html

[dvfalcon 352]

The one at the front of the arm rest under the handle is about 8g (gauge) phillips head self tapper 3/4 inch long and the two underneath are about 14g Phillips head 1 inch long

Dale

[bear351c 10,273]

That sounds about right. Think the XB ones are smaller. XD screws are frikkin huge,!!!