Damo 15 Posted December 13, 2015 Howdy, I was lucky enough to pick up some Xe door cards and armrests but they didn't come with screws/bolts And I am unsure on the proper size and length for armrests, can anyone help On this? Cheers Damo Share this post Link to post Share on other sites
SPArKy_Dave 8,954 Posted December 13, 2015 Not sure if they're the same, but you could try the XR-XY screws - http://www.gtshop.com.au/product/clips--screws--bolts--brackets_25/xr---xy-armrest-screw-kit/?&?product_variant_id=2123 1 Damo reacted to this Share this post Link to post Share on other sites
deankxf 20,397 Posted December 14, 2015 Howdy, I was lucky enough to pick up some Xe door cards and armrests but they didn't come with screws/bolts And I am unsure on the proper size and length for armrests, can anyone help On this? Cheers Damo they are self tappers, thickest ones i have seen with a phillps head on them about an inch long for the 2 main ones. the one near the handle is small and short. they go into a plastic thingy in the door from memory, are these going onto XF doors(wont have the plastic whatsit doover if so) 1 XTREME KARTS XF reacted to this Share this post Link to post Share on other sites
Damo 15 Posted December 14, 2015 Cheers guys, no they are going onto XE doors Dean..... that gives me something to work with. Cheers Share this post Link to post Share on other sites
SPArKy_Dave 8,954 Posted December 15, 2015 Cheers guys, no they are going onto XE doors Dean..... that gives me something to work with. Cheers Try these too - http://www.xbfordfalconshop.com/products/Armrest-screw-set-%282%29.html Share this post Link to post Share on other sites
dvfalcon 354 Posted December 15, 2015 The one at the front of the arm rest under the handle is about 8g (gauge) phillips head self tapper 3/4 inch long and the two underneath are about 14g Phillips head 1 inch long Dale 1 Damo reacted to this Share this post Link to post Share on other sites
bear351c 10,277 Posted December 15, 2015 That sounds about right. Think the XB ones are smaller. XD screws are frikkin huge,!!! Share this post Link to post Share on other sites