XH302
Members-
Content Count
16 -
Joined
-
Last visited
About XH302
-
Rank
Newbie
Recent Profile Visitors
The recent visitors block is disabled and is not being shown to other users.
-
SPArKy_Dave reacted to a post in a topic: Dent in rear Panel advice needed on removal
-
deankxf reacted to a post in a topic: Removal of intake?
-
deankxf reacted to a post in a topic: Dent in rear Panel advice needed on removal
-
XH302 started following Removal of intake?
-
I replaced the coolant lines today as both those connected to the throttle body spacer were old/brittle.
-
XH302 reacted to a post in a topic: Removal of intake?
-
XH302 reacted to a post in a topic: Removal of intake?
-
The consensus seems to be PDR. The crowd has spoken, so I will listen! Appreciate people pointing me in the right direction. Man I tell ya when I did the plunger and it worked I thought I possessed Jesus powers, then I bumped into it and the metal caved back in again. I agree with the advice given here. let me finish this tear down of the LIM. I was posting pics because people always like to see progress before/after.
-
XH302 reacted to a post in a topic: Dent in rear Panel advice needed on removal
-
XH302 reacted to a post in a topic: Dent in rear Panel advice needed on removal
-
XH302 reacted to a post in a topic: Dent in rear Panel advice needed on removal
-
XH302 reacted to a post in a topic: Removal of intake?
-
Free.51 reacted to a post in a topic: Dent in rear Panel advice needed on removal
-
this assumes you are loading from another website/source as IMG tags are embed in a HTML page. Images are not technically inserted into a web page; images are linked to web pages. won't help me loading person pics.
-
Thanks Dean, Seems to be bit of mission just to post a photo, I might just give it a miss mate, Photobucket isn't free anymore nor are others mentioned in that link, also would like to stay away from FB and other sites. all good
-
bear351c reacted to a post in a topic: Removal of intake?
-
%5B/img%5DThought%20I%20would%20touch%20up%20the%20Air%20intake,%20clean%20Maff,%20and%20respray.%20Turned%20out%20ok. %0A%20%C2%A0 %0A%20Edit**%20I%20fixed%20pic%20up,%20Getting%20error%20code%20200%20when%20I%20upload%20images%20to%20the%20website %0A%20%C2%A0 %0A%20 %0A%20%C2%A0 %0A%5Bimg%5D https://imgur.io/a/AKTUPVX
-
There's 2x 10mm bolts holding it to the throttle body bracket for those who wish to remove their Intake in future. I will continue to disassemble, This flu has fucked me side ways.i feel shit house.
-
Cheers Nath, The small plunger popped it out but then it caved back in, I guess I will need to go the car-filler/Sand route.
-
My apologies Bear, I have fixed the Link up, just one of those days where everything is going wrong. The manual says 1) drain coolant 2) disconnect & remove intake. it has skipped about 10 steps in between lol. Im not sure how to remove the acc cabling without snapping 20 year old brittle plastic. https://imgur.com/D8WFHTa
-
XH302 reacted to a post in a topic: Removal of intake?
-
bear351c reacted to a post in a topic: Removal of intake?
-
greetings, Need to remove the intake so I can replace LIM Gasket. Im aware of the 6 bolts but where else is this sucker connected? here is a pic.
-
Hey guys, As title says, How do I remove the dent below and others like it? and what tools do I need to buy to repair these dents? I also understand there are different methods please explain(thx Pauline) https://imgur.com/0GLjcC3