EA run TFI dizzy, EL run TFI dizzy, so that's ok. EA ecu will want base timing of 10BTDC regardless of motor, but I'm not familiar with AU motor. I take it they only have a 0 degree or TDC timing mark. In that case, get a piece of string, go around the crank. Take string and measure length. Then divide Length by 36 This will give you the distance of ten degrees of timing. Put white mark that distance to right of original timing mark on balancer and when in base timing mode, line the new mark on balancer with original TDC marker and you will be at 10BTDC. I have a digital timing light which is even easier. Increase timing on light to 10 degrees advanced and mark spot on the motor, then return light to 0 and align new mark with original crank marker.Done. Sent from my S21 using Tapatalk