FAT245 53 Posted February 5, 2015 Hey Guys,I have been wondering if there is any need for a reflashing service to flash an AU V8 EEC with Specific Settings to aid Conversions?I know that you can buy a chip for it, and this is a good Option if you want to mod the motor and tune it, but some guys just want to install a stock motor and cruise..I can do Most (If not all) AU V8 EECsConvert Manual to Auto Convert to Different Automatic Types E.g. C4 or other Non Electric Boxes (This helps with Idle Control)Remove Speed and RPM LimitersDisable ABS / Traction ControlDisable Torque ModulationDisable Fault CodesEnable or Disable EDISEnable or Disable Adaptive ShiftEnable or Disable SmartlockEnable or Disable SmartshieldEnable or Disable HEGO SensorsThese are just some of the settings which I have access to.Let me know your opinions... Nathan 1 gerg reacted to this Share this post Link to post Share on other sites
NZXD 2,328 Posted February 5, 2015 I think it's a great idea. I just found a advert here in NZ where a guy is doing the same but with the LS engine ecu and loom, turns it into a 5 wire hook up that any person with basic car knowledge can install. If you could do that so its plug and play, make life very easy for people. Share this post Link to post Share on other sites
FAT245 53 Posted February 5, 2015 I do have a mate who is starting to build Custom EEC Looms for the AU based Engines.... xD Share this post Link to post Share on other sites