scottly 475 Posted February 24, 2014 hey guys, im slowly doing the body work on my xd ute and finding the doorjams a bastard to sand by hand its so time consuming. is there a specific tool for this I was looking at 2inch orbital sanders but can not find a Velcro soft pad and sand paper to suit any help would be great or links cheers scott Share this post Link to post Share on other sites
hendrixhc 10,922 Posted February 24, 2014 Cheap sand blasting gun form Supercheap is good. Brass wheels on the angle grinder and smaller brass wheels on the drill work well to. Share this post Link to post Share on other sites
nos2 751 Posted February 24, 2014 What he said^^^^^ Either way your fingertips are gonna end up flogged out Share this post Link to post Share on other sites
scottly 475 Posted February 24, 2014 shit sorry guys, I shoud of posted this in the first post, Im after a tool to sand body filler down and the highfill primer down in the tight areas but keeping it all even thanks Share this post Link to post Share on other sites
hendrixhc 10,922 Posted February 24, 2014 Are ok in that case, i think a small sanding block and fingers are the go! lots of time and lots of patience. Share this post Link to post Share on other sites
revhead 1,392 Posted February 24, 2014 don't be a skirt if paints still good go n buy scotch brite ,and prepsol give it a good rub an paint straight over 1 Stevemack reacted to this Share this post Link to post Share on other sites
scottly 475 Posted February 25, 2014 thanks for the replys guys looks like it has to be done by hand, I was hoping for a easy way out but hey got to do what you got to do. ill post pictures in my build thread one day motivation is picking back up to work on my ute Share this post Link to post Share on other sites