wagoon 2,429 Posted June 5, 2013 Just a bit of information for people. If its been covered sorry but I couldnt find it. Currently I am looking around for a good set of used roller rockers for a crossflow and I'm not having much luck. I have been looking for yella terra stuff mainly but I have heard nothing bad about scorpion performance roller rockers. So I emailed scorpion direct to ask if they had a set of 12 bolt on rockers instead of 16 that fit a cleveland. I recieved a reply from their technical director saying that the set with part number scp1069 which is listed for a ford 3.8litre v6 uses the same rockers as their kit for cleveland engines with part number scp1024 but with only 12. Share this post Link to post Share on other sites
slydog 7,873 Posted June 5, 2013 Cleveland Scorpions rollers on mine and where like $320 or so set. Leaves you with 4 spares. Engine master ebay and I such Share this post Link to post Share on other sites
wagoon 2,429 Posted June 5, 2013 Fair enough, but just letting people know that dont want to buy a v8 set. Share this post Link to post Share on other sites
slydog 7,873 Posted June 5, 2013 Cool good hook up bro... Share this post Link to post Share on other sites
noddy 451 Posted June 5, 2013 how much are they going for and would they clear a stock efi tappet cover or spacer//aussiespeed tappet cover needed?? you have my attention as i am shopping around too!! Share this post Link to post Share on other sites
slydog 7,873 Posted June 5, 2013 Nope you need a spacer for the EFI rocker cover...them rollers are also a stud mount unit which means you need to machine and drill and tap your head to accept a 3/8th-7/16 (Mk5 454 studs) set up or a 7/16th-7/16th stud. Share this post Link to post Share on other sites
ILIED 316 Posted June 5, 2013 You can get some Scorpions that bolt stright into the factory spot Share this post Link to post Share on other sites
noddy 451 Posted June 5, 2013 Yeah I can get one of te blokes at work do that for me but I have heard a rumor or two about crane bolt os that fit under a editor tapper cover had no one confirm it tho -.- Share this post Link to post Share on other sites
wagoon 2,429 Posted June 6, 2013 That part number I supplied is for 5/16 bolt on 1.73 ratio Edit: see page 7 of the scorpion catalog bottom left hand corner last part listed on the page. You can down load the catalog of the scorpion website, is about 8MB in size. 3 noddy, Lord_fahrquhar and slydog reacted to this Share this post Link to post Share on other sites
wagoon 2,429 Posted June 6, 2013 In regards to price because its made for an american v6 you can probably only get it from the states. I have seen prices from $170 to $200 plus postage depending on the seller. 1 slydog reacted to this Share this post Link to post Share on other sites
slydog 7,873 Posted June 6, 2013 Sounds good bud...good hook up here guys. Share this post Link to post Share on other sites