Jump to content

XES 384

Members
  • Content Count

    12
  • Joined

  • Last visited

About XES 384

  • Rank
    Newbie

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. XES 384

    XE S-PAC Fog Lights

    Hi all, Would anybody please have the dimensions of the fog lights that were supplied from factory? Also were they Bosch, Hella or something else? Cheers Sent from my iPhone using Tapatalk
  2. Hi all, At some stage I need to either get my BW40 re-built or swapped out. I have a 250 EFI and to be honest, it’s about as slow off the mark as I can handle [emoji38]. I have been told that these trans do suck a fair bit of power out of the engine before the rear wheels and I know I can change the diff ratio and other things to improve it, but it’s not a huge problem whilst I am running a cross flow. My real question is- if I was to swap the BW40 out for a C4 (in preparation for a V8 swap), would it suck even more out of the 250 or would it be much the same? Also, what else would I need to change if I go to a C4? Thanks in advance! Sent from my iPhone using Tapatalk
  3. XES 384

    XE Diff Ratio

    Update- had the diff rebuilt and confirmed it is 2.77:1
  4. XES 384

    XE S PAK seat material

    Cheers guys, have spoken to Adam and Global Trim but no joy on the Chamois colour. I am a member of most of the FB pages so will continue to ask around [emoji106] Sent from my iPhone using Tapatalk
  5. Hi all, Wanting to repair my seat, as it’s the only part of my interior that is really letting the car down. Any idea where I could find some fabric please? Cheers Sent from my iPhone using Tapatalk
  6. XES 384

    BW40 to Replace BW35

    Update- finally got the car up on a hoist and can confirm as you said, it’s a BW40. Cheers for your advice [emoji106] Sent from my iPhone using Tapatalk
  7. Hi all, anyone know what diff ratio an 84 XE S Pack 4.1 EFI auto sedan would come with from the factory? Cheers Sent from my iPhone using Tapatalk
  8. XES 384

    XE Seat Upgrade

    Hi guys, just wondering if there are any modern bucket seats (ie BA-BF-FG, FPV or even any non Ford seats) that would bolt straight in, or at least easily be adapted to fit an 84 XE S-Pack? Cheers Sent from my iPhone using Tapatalk
  9. XES 384

    BW40 to Replace BW35

    Thanks mate, much appreciated [emoji106] Are there any other Trans options you would suggest I consider that are perhaps even simpler to swap or would the BW40 be about as simple as a it gets? Sent from my iPhone using Tapatalk
  10. Hi all, Did a search but results a bit mixed so here goes- What would be involved in swapping a BW40 out of an XF into an 84 XE EFI that currently has a BW35 in it? Straight swap or is there more involved? Cheers Sent from my iPhone using Tapatalk
×