Tyler06
Members-
Content Count
558 -
Joined
-
Last visited
-
Days Won
1
Content Type
Profiles
Forums
Calendar
Everything posted by Tyler06
-
Cheers guys. Gives my something to mull over. Gonna sleep on it and order my parts tomorro, Cheers again :-)
-
Yeah got told BH100GP is the go???
-
Head gasket lol Im gonna go King Race bearings and 12/1cr
-
Im bumping up my CR now to suit the E85 so need something solid. What has your engine got in it ATM rob?
-
Well spotted there mate. Had some good advice lol
-
He is modding my QFT for E85 and doing my tune. Spoke to him today and should work out well :-)
-
Some of the last bits I have been waiting on to put my crossflow together. Crow are Grinding my cam now as well so thats a week away then get my carby modded for E85. Lots to do. A few little new additions to buy as well. But steady as lol
-
I need the offset crank so maybe I should get that first lol
-
Cheers mate I have a guy I will use for my porting ;-) TFC manifold I already have and I would love maintenance free. Any suggestions? Ill try another machinist.
-
Wayne at performance carb tuning mate. Or SCM done my last one and were quite good. Only thing ive had trouble with is a decent tuner for the msd programmable. I use a wideband o2 and ltx-2 setup in my dash for a bit of clarity.
-
Oh so close to 10s im sitting on the edge of my seat!!!
-
Lol at valves no roller for this little corty. Everyone is going roller ill stick to solid or ill just completely change corty history if it doesnt go to plan this time!!!
-
They would be the ones ;-)
-
Really? Cant believe I havent been in here for this long! Been busy with the family and other projects but im back onto SNAIL ETR. Sean/stumper/clevo120y has finished up with my head so im gonna make a little road trip down to pick it up. Block is going in for new cam bearings AGAIN LOL. Oh btw I wiped a lobe off my cam so hence the pull down again. My biggest predicament at the moment is no one in Aus has the valves I need. Hopefully I will have it ready for the engine dyno within 8weeks parts permitting haha. The only engine dyno owners we have here just happen to be customers of my work Superoo so I know they will look after me and they are even getting a plate made up especially for the job ;-) Im still gonna use a solid as funds dont permit the big move to roller but good things to come soon hopefully :-)
-
Id be careful because if you thread it out to far there will not be enough meat left to recoil it. If its the water pump then you are in steel which means you are better off getting it done by a pro and save yourself the trouble. Go too far and the block is farked.
-
Looks custom to me.
-
They might seem cheap but still double the price of the kits from the US delivered. Thats what I found.
-
Head gasket or intake gasket would be my first point of call.
-
They will be AU offset so grab some 30mm spacers.
-
No I just got new black xf ones and they worked perfect.
-
Heres my xg one done and in my xe as of tonight. Easy as :-)
-
Have you ran a positive from the battery to the coil yet?
-
I think you and sly have some talking to do and a tunnel ram sounds like something we can chat over when I come down ;-)
-
8cc dish and yes 200 rod combo.
-
I had the head cc'd and it had 45cc aparently. I have std deck height now with my ne block. I think it was 0.050 wen I checked and I should have around 11.1/1 comp?