dougie77

Raced last night. will try get videos up later of in car helmet cam and from crowd
 

All finished (for Now)
 

 
 

 
 

I keep changing the screen and turning and tilting but that's not a crossy

So track soon?

Got it all in the car and running, alot of time spent on the laptop getting all the systems setup. LOL now the engine idles do low may alternator needs a smaller pulley because i don't have any voltage at 800rpm!!!!!
 

These blokes didnt notice anything loud lol.

Making the old girl Fast n Loud

Sat the engine in the car and made a 3" dump pipe. Finished off some hoses. Hopefully ill get the fuel system plumbed in and electrics done tomorra

Xflow - 345hp @ 6100 333ftlb @ 4700
FG -    355hp @ 6050 342ftlb @ 4500
 
same dyno, same fuel brand, same manifold, same exhaust, same tuner, 3 years apart!!
 
So thats a stock FG DOHC head port, chamber, valve angles etc which is different to BA DOHC also we love vct saw one simple change at 5000 to the exhaust cam and gained 20hp!!! the cams have 60 degrees of movement and we are using all of that through the rev range.
 
Should be back out racing in the next few weeks if all goes well.

Just a teaser mapping at 5000
 

We had to make one off mounts and notch the crossmember just to get him in there lol
 
 
Cortina for life

How the fuck did I miss this thread??? Loved the old Beacon as you know so excited to see the new one coming along mate.

Camtech 510
 
 
Cortina for life

We had to make one off mounts and notch the crossmember just to get him in there lol
 
 
Cortina for life

I don't wanna know about the shortened gear stick..

What engine mounts and did it clear the crossmember?

Well we didn't get it done but we did get close fuel system is done wiring is almost done engine is in the hole just need to plumb up the carb and water and tie up some loose ends then it will be a pool so next weekend it should be done here are some pics

Dave powered Corty

It's in the hole
 
 
Cortina for life

Well the strip out of the old beacon has begun tell you what it didn't want to come out as the car was pretty fucking bent
We had to take the gearbox and the bell off cause the car was squashed around them but all seams to be ok. Tomorrow the teardown of the new one starts with any luck should be running by tomorrow night

Well we didn't get it done but we did get close fuel system is done wiring is almost done engine is in the hole just need to plumb up the carb and water and tie up some loose ends then it will be a pool so next weekend it should be done here are some pics

Dave powered Corty

It's in the hole
 
 
Cortina for life

Videos?

Allmost a pool

No time to work on it tomorrow ill be burning the tyres off towtoy HEHE

Well we didn't get it done but we did get close fuel system is done wiring is almost done engine is in the hole just need to plumb up the carb and water and tie up some loose ends then it will be a pool so next weekend it should be done here are some pics

Dave powered Corty

It's in the hole
 
 
Cortina for life

Here are some more shots of how bent it is
 
Note to self don't do that again

Well the strip out of the old beacon has begun tell you what it didn't want to come out as the car was pretty fucking bent
We had to take the gearbox and the bell off cause the car was squashed around them but all seams to be ok. Tomorrow the teardown of the new one starts with any luck should be running by tomorrow night

Fuel system is out manual pedels are in his car, engine will be in soon arr big cam crossy manual and 13s HEHE

Start praying to the smoke gods

This will be me soon im thinking the new corty needs my big webered engine

That nitrous power does bend chassis