Perky

Hi guys n girls Well I am putting my weber back on n getting rid of my gas it's a 1991 xf but I have put the tfi dizzy n msd in so no more est....... What I want too no is what do I need too plum up n what can I delete..... I want the choke n no I need 12v for that n idle jet but all the hoses n other plugs don't no about them Cheers Dave Oh I would put a pic up too point some of these things out but don't no how too

That's cool Matt hope I helped a bit.... Cheers

As pro said.......:-)

I have the same set up in my xf ute b2 conv 225 mixer efi manifold motor was rebuilt only 30 tho over not 60 and fully ballanced the cam I can't remember but could find out if u like The head I just had a bit of porting done n rebuild n runs 10-1 comp. I also run msd ignition with a tfi dizzy it goes great I run a t5 behind her with a 3.23 LSD diff gives all my mates a run for there money In there v6 commy utes Cheers Dave Oh n extractors n a 2-1/2 inch exhaust

That's good news......:-) I always use a ryco

Yeah no additives this oil change noticed that the Penrite had the zinc in it already so was thinkin to much of a good thing is sometimes bad yeah........ Done the oil change yestaday been diving around today all seems well great day for a bit of a cruise:-)

Oh my ones were only 1.5 inch blocks didn't read properly but they would prob have them

Hay buddy Your local bearing shop or bolt shop should stock them that's were I got my ones from Cheers Dave

Dame hawks hoping Fremantle would get a running.....

Hay well thanks for all the feedback been great as always......:-) I went with Penrite 20w60 I hope I made the right choose..... I spent ages at repco looking at all the different oils it was doing my head in I was just worried I spent lots of money n time on my crossy n don't want to kill her so thanks for all your info guys......

Hi we'll it's been fully ballanced n has a bit of a cam can't remeber specs n runs straight gas with port work Cheers for the reply Il get cam specs out if u want them?

Hay guys time for another oil change I've done 3 thousand ks sence the rebuild n I've been using valvolene oil that they supplied from the engine builder n been adding the engine running in additive.... So time to go get my own oil but don't really no what to get Anyone got a good oil they use n have stuck with? Cheers Dave

Yeah i have a crossflow so the note ant as impressive as a clevo.... But am interested il pm ya

Thanks for the ideas guys... I don't have fuel tank anymore it rusted out years ago n i run straight gas now but I like the idea of putting the sub so it comes through into we're the tank use to be.... N thom your idea sounds good too how big of amp n sub did u run so that u could hear it?