Trev Vaa 1,185 Posted June 16, 2013 i beleive "fucked" is the correct condition term of these... thats gotta be up there with the best of them how does the cam look? 2 XTREME KARTS XF and gerg reacted to this Share this post Link to post Share on other sites
gerg 10,871 Posted June 16, 2013 Cam lobes:<br /><br /><br /><br />I retract anything bad that I said about Dynotec cams, as it seems it stood up to punishment quite well considering how bad the lifters are. I apologise if gave anyone the wrong impression. I also found that the blanks used for Dynotec are the same as Crow's, and with the latter being a reputable brand, I'd suspect that they'd use something decent. One had a casting mark of "CW1" and the other "CW2", everything else looked identical.<br /><br />So there you have it... Rubbish lifters can cost you much more than maybe 30 bucks in what you save on a good quality set. I'll stress that I did not buy the originals, they just came with the engine. The new Crow cam got a set of Johnson Hilifts (made in USA). Share this post Link to post Share on other sites