SirkWhyXF 1,533 Posted February 15, 2016 I've got the EB handbrake cable, and got the EB lower trailing arm bushes to press into the XF arms, but can somebody please tell me what part i need (and where to get it) to adapt the XF brake lines to the EB brakes. Share this post Link to post Share on other sites
Campo 869 Posted February 15, 2016 I didn't need anything to adapt them on mine Share this post Link to post Share on other sites
wagoon 2,429 Posted February 15, 2016 Editted to remove this dribble and replaced by hopefully easier to understand dribble in my below response. Share this post Link to post Share on other sites
Banno 479 Posted February 15, 2016 If your talking about the hard line on the body to the flex line on diff? You can get them from ABS for couple of dollars. They are imperial female insert and metric outside I think to fit. I needed it for my car when I swapped diffs over. Anything else you need they should help Share this post Link to post Share on other sites
wagoon 2,429 Posted February 15, 2016 Yeah instead of buying the adaptor I took the flex line from diff to body from the xe and used that on the e series diff. The hard lines on the xe drum diff fit both the flex line going into the caliper and the block where the breather is. The block where the breather is was removed from the xe diff. Cost me nothing at all and all threads wound in just fine. Sorry realised I didnt explain it better before Share this post Link to post Share on other sites