Outback Jack 6,352 Posted January 21, 2016 Hey guys, Me young mate built a kick ass lil turbo set up for his XG ute but today the turbo shat itself. Looks like the oil seal failed then bearing collapsed sending the impeller into the housing and ground it a new arsehole. Lol Poor bastard is an apprentice mechanic, so funds are tight. The turbo he had was a cheap brand and will be binned. My question is would anyone have a decent garrett maybe rebuilt or maybe a turbo off a later model falcon that they don't need due to upgrading to a bigger set up? He's a good guy and would just like to help him out if possible. Cheers. .. Jack. Sent from my GT-S7583T using Tapatalk 1 Austen Mogg reacted to this Share this post Link to post Share on other sites
NZXD 2,328 Posted January 21, 2016 I'd hate to think where all the little shavings have gone. <br /><br />What was the set up like when it was running properly? 1 Outback Jack reacted to this Share this post Link to post Share on other sites
PRO250 1,506 Posted January 21, 2016 T04E off fleebay not the best but there $300 bucks and will last a while if it runas a stock ecu its not making more then 8psi anyway so the turbo will last a while 1 Outback Jack reacted to this Share this post Link to post Share on other sites
Outback Jack 6,352 Posted January 21, 2016 I'd hate to think where all the little shavings have gone. What was the set up like when it was running properly? Was running well mate. Say those shavings went out the dump.... lol. T04E off fleebay not the best but there $300 bucks and will last a while if it runas a stock ecu its not making more then 8psi anyway so the turbo will last a while Cheers Pro250. Will let him know. Jack. Sent from my GT-S7583T using Tapatalk Share this post Link to post Share on other sites
Outback Jack 6,352 Posted January 21, 2016 T04E off fleebay not the best but there $300 bucks and will last a while if it runas a stock ecu its not making more then 8psi anyway so the turbo will last a while Hey pro 250, mate seems to think his MAP sensor can flow 14psi. Is it something in the ECU or something else that restricts it? I dunno much about the limitations of the stock set up in a turbo application. Sent from my GT-S7583T using Tapatalk 1 Austen Mogg reacted to this Share this post Link to post Share on other sites
Austen Mogg 2 Posted January 21, 2016 Hay Jason ozy hear how the fuck do you up load videos ? Share this post Link to post Share on other sites
Outback Jack 6,352 Posted January 21, 2016 Think ya can do it via photobucket ozy.... and make an introduction thread and say HI to the fellas here at Oz falcon. Welcome aboard. You can also start a build thread on ya ute..... plenty of pics and vids... The guys like to watch...... haha. Sent from my GT-S7583T using Tapatalk Share this post Link to post Share on other sites