dex 2,065 Posted September 30, 2015 Hi all .. What saas wheel boss do I need to suit a flat autotechnia wheel . At the moment I have a rather comical Luisi wheel that is tiny ...like a Xbox size wheel . I have the autotehnia wheel ...but the boss kit on the ute is for a dished wheel ....there for ..the new wheel sits near right on the indicator and wiper stalks ... Need a flat wheel boss .. But reading saas spiels shows xf only to 88 " sedans /wagons ..etc Anything there on is ea . Then no correlation to either dished wheel or flat .. Any help pointing me in the right direction will be received with great appreciation .. Cheers Share this post Link to post Share on other sites
XTREME KARTS XF 1,212 Posted September 30, 2015 SAAS BK132L will work Share this post Link to post Share on other sites
Mr Polson 10,214 Posted September 30, 2015 If you have a late (after 1987) XF, generally look for 1987 parts as they should MOSTLY be the same, there were a few minor mods. Share this post Link to post Share on other sites
dex 2,065 Posted September 30, 2015 Cheers fella's .. Have done so with early x series .. This " later model " threw me a curve .. Share this post Link to post Share on other sites
dex 2,065 Posted October 4, 2015 Bit of a follow up on this. . After running around Hobart to find a boss kit ..I found a stockist of saas kits ..auto one .. Only had one sort of the bk132L ...the L being the long option . But on comparing it to what I have on the ute .....its the same bloody depth ...,?!? And being the long weekend ..no good trying to ring the mainland to confer .. So said thanks for the help , and just about made it to the door .. Young bloke behind the counter called out ... " hey mate ...just remembered we have one of these ..." An adapter/extension Happy as Larry ....even tho the cost was near the same as a new boss kit . Has allowed me to bung the larger sporty wheel on and can now see the gauges .. And a tonne of room between the wheel and indicator and wiper stalks ... Maybe a bit too much room ... Will get a mate to machine it down a bit with the lathe . Share this post Link to post Share on other sites