JGP 14 Posted April 1, 2015 Looks the part, anyone used? http://www.ebay.com.au/itm/FORD-Falcon-XD-Fairmont-Ghia-ESP-Front-Rear-Chrome-Bumper-Mould-sedan-ZJ-FC-LTD-/301571460202?pt=LH_DefaultDomain_15&hash=item46370f4c6a Share this post Link to post Share on other sites
hendrixhc 10,921 Posted April 1, 2015 I used the chrome wheel arch mould as many others have. It was about $23 dollars to do the whole car. Being that the product comes from Global trim it would be a good quality product. If i was going a concours resto i would likely use it. 2 JGP and SirkWhyXF reacted to this Share this post Link to post Share on other sites
NZXD 2,328 Posted April 1, 2015 Looks like the proper stuff. 1 JGP reacted to this Share this post Link to post Share on other sites
TUFE 284 Posted April 1, 2015 Looks like xds had a different profile to xes. The d-profile stuff is cheap as hendrixhc said. Ive used red in mine, came up schmicko 1 JGP reacted to this Share this post Link to post Share on other sites
xr6tjet 98 Posted April 1, 2015 This stuff made by Ben at trimmaster is an exact replica 3m tape he had made up. You won't beat the quality! Wheel arch moulding is more for XE/XF 1 LTD083 reacted to this Share this post Link to post Share on other sites
SirkWhyXF 1,533 Posted April 2, 2015 I used the chrome wheel arch mould as many others have. It was about $23 dollars to do the whole car. Being that the product comes from Global trim it would be a good quality product. If i was going a concours resto i would likely use it. Sounds like the stuff i used on the xf Share this post Link to post Share on other sites