Free.51 2,734 Posted March 6, 2015 hi guys i bought these the other day & im not too sure if they go on top coil spring or between the coils. Share this post Link to post Share on other sites
tpak addict 1,909 Posted March 7, 2015 they go on the flat part of the spring.... usually the top.... I put them in the back of my Lane as it was tooo loooow and scraping on the guards Share this post Link to post Share on other sites
Campo 869 Posted March 7, 2015 Yep, on top of spring to raise the car. Share this post Link to post Share on other sites
Free.51 2,734 Posted March 7, 2015 Thanks fellas appreciate it, but ive fucked up again i took thé massive tall springs out of the front and glued 2× 10mm spacers together on each side to give me a 20mm lift in thé front and drove onto a flat pièce Of ground & thé cat converter is thé lowest point now on thé car and is less than 100mm so ive gotta take out thé lowered springs & shocks again & put thé tall springs & shocks in again silly me,well atleast itll be easier now by removing thé bump stop plates first. Share this post Link to post Share on other sites
tpak addict 1,909 Posted March 7, 2015 Did you do the back as well?? How much out is it? Share this post Link to post Share on other sites
Free.51 2,734 Posted March 7, 2015 No i didnt put spacers on the back, id say its 80 -90mm from the cat to the ground im using an old push rod which i cut at 100mm as a reference. Share this post Link to post Share on other sites