dusty_ben 143 Posted August 4, 2014 Hey guys putting a barra into my Xf. Going to run a ba steering wheel so I think I'll try a ba steering column. I'll run the ba stalks n key barrel. Wondering if I can run the lock and unlock buttons on the key. Any ideas on how I could do this? Would I be able to use a aftermarket centre locking kit n program the factory fob? Or could I use the ba bcm n run the power windows also from it. <br />Cheers for the help. New to electrics n jumping in the deep end with this build<br />Ben Share this post Link to post Share on other sites
Outback Jack 6,352 Posted August 4, 2014 Heya Ben =) , you will have the triggers for the central locking from the ECU, all you need is motors in the doors for them to trigger the locks and to run the central locking wiring to the doors. Basically, you need the whole harness from the BA everything from the back of the cab , forward. Hope that helps. Jack. Share this post Link to post Share on other sites
dusty_ben 143 Posted August 5, 2014 I thought the elec windows n Central locking are in the bcm? Not the ECM. Have a xr6 ba I can strip parts from if nedd be Share this post Link to post Share on other sites
Outback Jack 6,352 Posted August 5, 2014 BCM...... ECU...... they all taste like chicken to me.................... but ya get my drift. =) . That parts car will come in very handy. Jack. 1 ZL. reacted to this Share this post Link to post Share on other sites