Jump to content

P100_Ute

Members
  • Content Count

    438
  • Joined

  • Last visited

  • Days Won

    5

Everything posted by P100_Ute

  1. P100_Ute

    What engine

    Yup this will tell you. i did it to my engine to check.
  2. P100_Ute

    OTD 250 Kenny's Corty!

    Looks great Ken. With triples now not having the filter out bonnet is more sleeper. Just noticed you still running 4 stud pattern also. usually see ur car in launch mode and not close up like this. Good to see.
  3. P100_Ute

    Pix or Vids of Tough Cortys

    Nice. steering wheel is pretty gangsta!
  4. P100_Ute

    P100's 1979 TE Cortina Ghia

    First present arrived already. Went and picked them up today. CRS 5 Stud Brake upgrade off another forum member for a absolute bargain so i had to take it.
  5. P100_Ute

    Aircraft Tug

    Ever wondered what they use to tow stuff around in at airports.?
  6. P100_Ute

    Pix or Vids of Tough Cortys

    Hopefully this didnt ruin the day. very old video but recently come up again on youtube. years ago it was up for a bit then removed.
  7. P100_Ute

    Removing Xflow and gearbox

    i just stick front wheels on 2 pavers high to clear the legs of crane under the lower controll arms. This was in my garage and i didnt have any height issues getting it out. Undid the 2 bolts on gearstick for the T5 and left the plate and short stick still bolted to the top of box. Used tailshaft yoke to bung the rear up and i got a spare speedo cable cut to block the speedo hole as oil will leak out of there also when you tilt it back. and voilah out she came. Falcons have bigger bays so you should get it out peice of piss.
  8. P100_Ute

    two speed power glide .

    Why dont u keep it manual. that way you dont need to fart around swapping boxes etc between manual and auto. This fella ran 10.6 with a Manual BA back in 2010? *edit* found a more recent video. running 9.8 still with manual box.
  9. P100_Ute

    P100's 1979 TE Cortina Ghia

    Yeh hence why we did it. It did cost me a trip to tiffanys in new york tho. so 25k for new york trip + trip to tiffanys = pricey way to destroy wedding dress. May speak to a PRO.. Dave? msg me your price.
  10. P100_Ute

    P100's 1979 TE Cortina Ghia

    Yes Hilux/Hiace runs Falcon Stud Pattern. i have both sitting here in shed and will get them both fabbed up to suit the car. so when i can afford a set of Convo Pro's i'll swap to the HiLux diff and bobs ya uncle. I have thort about the normal setup using cutdown falcon diff etc but i have descided to go this way as i think these diffs are stronger than the borg warners. they have 30 spline axles. i know people have broken them before but lots of people in the drag industry run them under rx3's running 9's etc. the axles are 33mm wide compared to the bw78 28 spline axles which are 30mm. And i like to try different things. and diffs are pretty cheap to source if things go wrong. for the diff + disc brakes to suit its $400.. and cost me bugger all to get my fabricator to swap over the mounting brackets from a corty diff to the hiace/hilux diff. got put onto a shop that can whip me up a tailshaft for about $300. so for under $1000. looking at almost bulletproof diff thats not a 9inch
  11. P100_Ute

    P100's 1979 TE Cortina Ghia

    Time to upgrade the Diff to something a little stronger and Falcon 5 Stud pattern. I did some Measuring of Diffs and some googleing. I have seen others have used Hilux diffs but due to their width you either need to run deep dish or nothing as they are 100mm shorter than the standard Cortina diff. Today i pulled out a diff out of a 1992 Hiace. Its a G series like the Hilux so it has a 8" Crownwheel and 30 spline axles and its only 20mm shorter than a Cortina. Weighs in a 85 Kilo which felt roughly the same weight as the Corty diff so thats not bad. I also got some Disc Brakes to suit it off a 1998 Tarago which uses a 291mm Rotor and has internal handbrake which keeps it all neat. ---
  12. P100_Ute

    P100's 1979 TE Cortina Ghia

    Engine went BANG on the freeway one morning. (September 2011) spare engine in shed all ready to go in. new oil pump and gaskets all round. Did a "Trash The Dress" shoot in October 2012 to get rid of the wifes dress as its sitting around collecting dust Professional pix
  13. P100_Ute

    Xf Falcon True Width?

    stick FG mirrors on the XF? winning!
  14. P100_Ute

    te cortina crossflow extractors into xf

    Nope dont fit. my mate tested my te extractors and it hits on something . cant remember if its steering box or something else but was no good
  15. P100_Ute

    Xf Falcon True Width?

    if your by urself hook it onto the glass on otherside.. measure to the mirror. then run around the other side and measure from the glass to that mirror and add the 2 measurements togethor. then you'll see if u can get it in the garage hole
  16. P100_Ute

    Xf Falcon True Width?

    the tape dont lie.. windows down, tape thru the guts and get sumone to hold tape on other side and you should get a mirror to mirror measurement correctly.
  17. P100_Ute

    My 79 TE Cortina Ghia

    Not bad for a car thats 4 sec slower down the strip. and im using ur old gearbox i get between 300-350km out of a tank
  18. P100_Ute

    My 79 TE Cortina Ghia

    Soft. Only 400km down the road. Only cost about $200 in fuel round trip. Cheep weekend cruise
  19. P100_Ute

    Pix or Vids of Tough Cortys

    Sneak pic. lol
  20. P100_Ute

    My 79 TE Cortina Ghia

    if we compare timeslips im about 4 seconds faster than urs.Time to change that next time ur at drags Shiny radiator is shiny. love how the scoop sits in this photo lookin up to it. Is it going to be rollin again for cruise next weekend?
  21. P100_Ute

    identifying t5 transmission

    T5 looks like this if ya look under car. XF-EL is same bolt up so can interchange
  22. P100_Ute

    Pix or Vids of Tough Cortys

    It pulls like a mofo on track. he took it to thing like powercruse over in qld and rollin along about 50 and stands on it just pulls from y he was next to. recons its got no lag. theyres a few vids on facey but dunno how to get them on here. Sean. havin ecu troubles. need to find a certain one to use with it. got about 20 that can be used but cant find any on fleabay. The tuner i using has a box of them for $300 so might grab one from him if i cant find one when i fly home next week at wreckers
  23. P100_Ute

    Pix or Vids of Tough Cortys

    Be a good little car to scare the odd Dunnydore on the way to Woolies to get the groceries
×