Jump to content

Robbo2804

Members
 View Profile  See their activity

  • Content Count

    10

  • Joined

  • Last visited

  • Days Won

    1

Robbo2804 last won the day on November 14 2024

Robbo2804 had the most liked content!

Community Reputation

9 Neutral

See reputation activity

About Robbo2804

  • Rank
    Newbie

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1.    SPArKy_Dave reacted to a post in a topic: XG won't start then won't turn off.
  2. Robbo2804 started following High revs at idle. and XG won't start then won't turn off.
  3. Robbo2804
    Hey All, Got a strange one today. Replaced a broken odometer gear in the speedo. Bit fiddly but easy enough to do. However once I hooked my battery back up the fuel pump primed and a clicking sound came out of one of the relays. Inside the cab the Altinator and smart lock lights were on. Key was OUT of the ignition. Put the key in to try to start it and nothing. Put the battery on a charger for a couple of hours. Came back and smart lock light was off but Alt light still on. Ute started ok but the ALT gauge showed no charge. Went for a quick drive and nothing changed, then I went to turn it off and it wouldn't turn off! Even disconnected the neg terminal. Only when i did the pos terminal is stopped. Any ideas? Do I need a Preist to throw holy water over it or something??
  4.    SPArKy_Dave reacted to a post in a topic: High revs at idle.
  5.    deankxf reacted to a post in a topic: High revs at idle.
  6. Robbo2804

    High revs at idle.

    Robbo2804 replied to Robbo2804's topic in 4.0 OHC

    Thanks guys I'll have a good look and listen on my days off.
  7.    Robbo2804 reacted to a post in a topic: High revs at idle.
  8.    Robbo2804 reacted to a post in a topic: High revs at idle.
  9.    deankxf reacted to a post in a topic: High revs at idle.
  10. Robbo2804

    High revs at idle.

    Robbo2804 posted a topic in 4.0 OHC

    Hey Groovers, My XGs idle when its warmed up sits at about 1200rpm. Before its fully warm its fine at 800ish. Any ideas on whats up and how to fix it? Thanks, Robbo
×