85 XF Ghia 17 Posted December 20, 2022 Hi Guys, Im after some help please. My digital cluster was working, then it just stopped. Ive checked the fusible link on the positive side of the loom to the battery as well and all the connections to the battery. Ive also checked the earth and the negative terminal connections. The lights at the back of the cluster work. I have no digital display. I welcome any feedback or information. Share this post Link to post Share on other sites
deankxf 20,292 Posted December 20, 2022 i don't recall having that issue, would suspect a fuse or plug not plugged into the dash correctly (2 plugs on them) Share this post Link to post Share on other sites
85 XF Ghia 17 Posted December 20, 2022 fuses are good, and the 2 plugs in the cluster are connected. Share this post Link to post Share on other sites
deankxf 20,292 Posted December 20, 2022 53 minutes ago, 85 XF Ghia said: fuses are good, and the 2 plugs in the cluster are connected. they were prone to corrosion on the terminals inside, and cracked solder joints. so consider dismantling it or sending it off to someone if you can't figure it out. there may be some more replies with things to check, but if nothing lights up at all i haven't seen that issue before. Share this post Link to post Share on other sites
