Kaden 3 Posted March 22, 2018 Hi guys i have a C2 Cylinder head and was just wandering are they any good and shoukd i be keeping this one.... Im starting a build on a 250 crossflow and this head came with it.. Any hellp would be muchly appreciayed and to point me in the right direction 2 Mark Bretherton and CHESTNUTXE reacted to this Share this post Link to post Share on other sites
CHESTNUTXE 7,311 Posted March 22, 2018 yep c2 is good,around 42cc if using 20cc dish pistons gets you around 10.7.1 with zero deck height Share this post Link to post Share on other sites
Kaden 3 Posted March 22, 2018 Ok cool thanks ChestnutXE... still unsure what im going to put the motor in though.. any suggestions 1 CHESTNUTXE reacted to this Share this post Link to post Share on other sites
CHESTNUTXE 7,311 Posted March 22, 2018 xf or xe sedan or ute can be had for decent money,ute you can get cheap and put a manual behind it. Share this post Link to post Share on other sites
Kaden 3 Posted March 22, 2018 Ok cool thanks for your help Share this post Link to post Share on other sites