unfamilia 1,938 Posted July 27, 2014 Any one heard of these??? http://www.wide-band.com/content/apsx-d1-wbo-controller-and-g1-led-display-full-kit Looks like the old jaycar set ups. No lights which I think I like more than stuff flashing around me Share this post Link to post Share on other sites
ando76 4,354 Posted July 27, 2014 Have not heard of them but it looks to be a reasonable kit with a BOSCH sensor and really that it where it is at quality wise IMHO. I love my AEM wideband and I wouldn't be without it. BOSCH 5 wire wideband sensor that stands up to metho very well and reads identical to my stand alone MOTEC unit (same sensor) and also runs identical to the mainline dyno's that I use. The real benefit of these sensors is their ability to read at idle when placed in the correct position. Dyno sensors are usually placed up the exhaust (as not to many people bother with two O2 bungs right up the front) where they struggle to read idle mixture fast enough due to limited exhaust flow. If you have a limited budget and limited space for a gauge then maybe that kit is the go. Having said that a full sweep gauge like the AEM or INNOVATIVE are about $220 delivered. Share this post Link to post Share on other sites
Anthony Pllu 262 Posted July 28, 2014 kit looks good, nice and simple Share this post Link to post Share on other sites
