Big Blue 17 Posted June 2, 2023 Gday, I was trail fitting the windscreen (yes I'll get a professional to fit it) but I noticed the top passenger side corner of the windscreen just sat up a bit more than the top drivers side corner (in its resting position against the frame). I know the screen has a thick seal that will space it out anyway , just thought I'd ask what you have seen in the past. They were mass produced things with terrible tolerances anyway. If I put a little pressure on each corner it sits into position. My question is, should it sit flush in its resting position, or do I need to tweak the top centre curve of the roof to bring the corners down? Share this post Link to post Share on other sites
SPArKy_Dave 8,892 Posted June 2, 2023 4 hours ago, Big Blue said: My question is, should it sit flush in its resting position, Which model falcon are u referring to?... we probably need to see pics, to give helpful comments. If u can get help, I'd remove/fit the screen myself, rather than the 'pro's'. 1 Big Blue reacted to this Share this post Link to post Share on other sites
Big Blue 17 Posted June 6, 2023 Sorry mate, XD 1 SPArKy_Dave reacted to this Share this post Link to post Share on other sites
Big Blue 17 Posted June 12, 2023 All solved 1 SPArKy_Dave reacted to this Share this post Link to post Share on other sites