Jump to content

Lott

Members
 View Profile  See their activity

  • Content Count

    61

  • Joined

  • Last visited

Posts posted by Lott

  1. Posted

    Thom, I did the cam run in today, then had a quick blast up the street. Now draining the oil and getting ready to start putting inner spring in.

    It's not going to get mistaken for a stocky anymore!

    Sounds real tough. It will be interesting to see how it goes on the dyno, and then to the drag strip.

    wagoon and Thom reacted to this

  2. Posted

    Good to know Stu5766. Got the heads back, bolted on, rockers adjusted, extractors bolted on. Want to finish putting it back together tomorrow,and run cam In on Saturday. Thanks Thom for the rockers and pushrods fits perfect.

    ando76, gerg and Thom reacted to this

  4. Posted

    Have looked at my heads need to get the seats done, install height to high. This MIght just blow out a bit from a just cam change.

    wagoon reacted to this

  7. Posted

    Looking at going a new cam either comp xe274 or 280h

    Anyone got any info good or bad on these cams.

    In a xd 351c dished pistons 2v closed chamber heads performer manifold either 600 vac sec or 750 dp Holley 4 into 1 pacemaker 2 1/2 single system

    ,auto 2500 stall, diff 28 spline 3.45:1.

    Thanks

  8. Posted

    http://www.lvvta.org.nz/documents/infosheets/LVVTA_Info_05-2004_Falcon_Balljoints-Aug_2004.pdf

     

     

     

    Brand (Supplier) 4-bolt (early model) 3-bolt (late model)
    Ford OE (no longer
    available)
    OK OK
    Quinton Hazell QH (Ford) OK, has about 2mm shaft
    clearance when contacting
    bumpstop
    OK, has about 2mm shaft
    clearance when contacting
    bumpstop
    CTR (Titan Auto Parts) Similar or better than QH Similar or better than QH
    WJ Automotive (AutoStop) X Binds while 25mm
    suspension travel remains
    before bumpstop is reached
    Binds while 25mm
    suspension travel remains
    before bumpstop is reached
    Silverline (Repco) X Binds while 25mm
    suspension travel remains
    before bumpstop is reached
    Binds while 25mm
    suspension travel remains
    before bumpstop is reached
    ‘Camelot’ (George Stock &
    Co) marked ‘TRANS’
    X Binds while 25mm
    suspension travel remains
    before bumpstop is reached
    Binds while 25mm
    suspension travel remains
    before bumpstop is reached
    555 (Titan Auto Parts) Example not found Example not found
    The three

    XTREME KARTS XF and bear351c reacted to this

  11. Posted

    What parts can interchange between between xd van and xh van. Barn doors are they the same. Roof is it the same shape.?

     

    The plan is to build a xd van that looks stock on the outside with efi v8 and 4sad auto.

    The van I have is factory v8 302. But it has rust in the quarter panels and some in the roof.

    Any info about body shape changes would be good, there are plenty of xg xh cabs at pick a part to cut up for rust repair if there the same shape

×