XFH00N
Members-
Content Count
33 -
Joined
-
Last visited
-
Days Won
1
Content Type
Profiles
Forums
Calendar
Everything posted by XFH00N
-
Hi all, Im just fitting a XG fuel tank into my XF ute and am just wondering what the 3 wires off the XF fuel tank go to (Black, Red, Green/Yellow) and what do I connect the 4 wired to off the XG tank? I am also swapping the dash over to the XG one. Also my XF is a 91model with the carby.
-
Well last year in December i got a F100 without motor or box for free so that became my newest project. It has a 3.50:1 lsd 9in in it and i am building up a 250xflow with a blow thru carby and a turbo which will be backed up with a T5. Well here are some pics of the work done so far. When I got it Stripping Tray I picked up cheap The damage The fun As it sits the bottom end of the motor is nearly ready to go in with the gearbox. Cab has been stripped and is ready for paint doors and guards are stripped, rust free and in primer and tray is 95%repaired just need to weld it out. Have also done a diff flip and painted the enginebay and chassis
-
Headlining installed Preping guards Then both were epoxy primed Then the hi fill Rear sway bar Drivers door in hi fill
-
ok time for the pics Colour preview Half of the loom. More on the other side of the bay Door prep Door in epoxy Headlining before Starting to trim it and ready for install Trims for headlining painted black from the original yellow Inside of cab painted Before on the left After on the right
-
I really need to update this. I have since got both guards and the drivers door straight and into hi-fill primer, left door will be done tonight. Have fitted up drivers side panels for alignment. Valve springs are all fitted to the head and have started on the dump pipe which will be done tonight. Im on break tomorrow which shall see the left door into hi-fill and the timing chain and head fitted along with the exhaust manifold, turbo and dump pipe. Will upload pics when i get time
-
well ive done some more. cleaned up the head and ports Lapping the valve valves and seals installed. Head and manifold on for mock up and the turbo I'm waiting for my valve springs to turn up so I can install them then bolt the head down and its onto making the dump pipe
-
Call or email Camtech. They deal with this every day of the week and look after their customers
-
The block had been honed and was nice and clean. Narr the hole isnt big enough for the bellhousing lol. But i have ordered my valves so hopefully will get the head sorted and on next break
-
Thanks for the kind words. Well im working for the next 8 days then i get 5 off so will hopefully get more done next break
-
Well the engine and box are in. Next i will fit the cam then start on the head. Tomorrow i will order my valves and valve springs.
-
Hi all just a few questions, First what size, length and grade bolts are used for the clucth on the 86DA engines? Where can i buy new valves from? What is the difference between the HF-1 and HF-2 heads?
-
Yeah both are blank between inlets 1 & 2 and have the HF under the rocker cover. mmmmm very interesting thanks for that
-
Weird since the HF1 came off a 93 xf ute. Thanks for that ill have to order some in.
-
Well a small update the motor is together other then the cam. Now I just need to do is find out the size of the clutch bolts so I can get them then I can fit the box up and put the motor in
-
Well had some parts turn up over the past few days bring on the weekend Box ready to fit Cam and Main bearings Lifters Cam turned up today aswell.
-
Cheers mate there has been some work on this harder then my previous cars ive done. New main bearings and cam bearings should turn up this week aswell as my cam and lifters(From Camtech) Which should see the bottom end put together then I can fit the flywheel, clutch and gearbox then I plan on fitting the bottom end and box into the truck so I can start sorting out the dump pipe and exhaust slowly
-
compression should be around 8.5:1
-
pistons are 22cc and cam specs Adv Dur Dur @ .050" LSA Valve Lift 286/288 226/230 113 .541"/.536"
-
will do next time im out in the shed
-
not sure off the top of my head. the one off the motor is a 93 xf ute unleaded and i also have a head off a efi fairlane
-
Lol. the different colours are just from sheet steel i had sitting in the shed and had painted other crap on it. When i get some time ill add more pics of where it is up to now
-
There is a Black and also Yellow off the fuel sender so would the black just be an earth and yellow signal to the gauge? Then off the fuel pump there is a Black and a Red so is the black a earth and Red 12v switched/ignition?
-
Hi all, I have a MSD street fire ignition with a TFI dizzy in my xf ute, Yesterday the ute was running but was hesitant at low rpm today I went to start it to start looking at the issue but the ute wouldn't start. I check the 2 power wires off the msd and they have power to it but the power light on the msd isn't coming on. What can the problem be here?