XFH00N
Members-
Content Count
33 -
Joined
-
Last visited
-
Days Won
1
XFH00N last won the day on December 4 2016
XFH00N had the most liked content!
About XFH00N
-
Rank
Newbie
- Birthday 08/29/1989
Profile Information
-
Gender
Not Telling
-
Location
Eastern Goldfields WA
-
XFH00N reacted to a post in a topic: F100 LWB 250turbo
-
SirkWhyXF reacted to a post in a topic: F100 LWB 250turbo
-
SirkWhyXF reacted to a post in a topic: F100 LWB 250turbo
-
Panko reacted to a post in a topic: F100 LWB 250turbo
-
scottly reacted to a post in a topic: F100 LWB 250turbo
-
scottly reacted to a post in a topic: F100 LWB 250turbo
-
2redrovers reacted to a post in a topic: F100 LWB 250turbo
-
SLO247 reacted to a post in a topic: F100 LWB 250turbo
-
Headlining installed Preping guards Then both were epoxy primed Then the hi fill Rear sway bar Drivers door in hi fill
-
ok time for the pics Colour preview Half of the loom. More on the other side of the bay Door prep Door in epoxy Headlining before Starting to trim it and ready for install Trims for headlining painted black from the original yellow Inside of cab painted Before on the left After on the right
-
ricktewagon reacted to a post in a topic: F100 LWB 250turbo
-
ricktewagon reacted to a post in a topic: F100 LWB 250turbo
-
SirkWhyXF reacted to a post in a topic: F100 LWB 250turbo
-
I really need to update this. I have since got both guards and the drivers door straight and into hi-fill primer, left door will be done tonight. Have fitted up drivers side panels for alignment. Valve springs are all fitted to the head and have started on the dump pipe which will be done tonight. Im on break tomorrow which shall see the left door into hi-fill and the timing chain and head fitted along with the exhaust manifold, turbo and dump pipe. Will upload pics when i get time
-
XFH00N reacted to a post in a topic: XG CLEVELAND ?
-
well ive done some more. cleaned up the head and ports Lapping the valve valves and seals installed. Head and manifold on for mock up and the turbo I'm waiting for my valve springs to turn up so I can install them then bolt the head down and its onto making the dump pipe
-
Call or email Camtech. They deal with this every day of the week and look after their customers
-
The block had been honed and was nice and clean. Narr the hole isnt big enough for the bellhousing lol. But i have ordered my valves so hopefully will get the head sorted and on next break
-
Thanks for the kind words. Well im working for the next 8 days then i get 5 off so will hopefully get more done next break
-
Well the engine and box are in. Next i will fit the cam then start on the head. Tomorrow i will order my valves and valve springs.
-
Yeah both are blank between inlets 1 & 2 and have the HF under the rocker cover. mmmmm very interesting thanks for that
-
Weird since the HF1 came off a 93 xf ute. Thanks for that ill have to order some in.
-
Hi all just a few questions, First what size, length and grade bolts are used for the clucth on the 86DA engines? Where can i buy new valves from? What is the difference between the HF-1 and HF-2 heads?
-
Well a small update the motor is together other then the cam. Now I just need to do is find out the size of the clutch bolts so I can get them then I can fit the box up and put the motor in
-
Well had some parts turn up over the past few days bring on the weekend Box ready to fit Cam and Main bearings Lifters Cam turned up today aswell.
-
Cheers mate there has been some work on this harder then my previous cars ive done. New main bearings and cam bearings should turn up this week aswell as my cam and lifters(From Camtech) Which should see the bottom end put together then I can fit the flywheel, clutch and gearbox then I plan on fitting the bottom end and box into the truck so I can start sorting out the dump pipe and exhaust slowly