'Nova

Hey guys! The old man just brought an FG G6, but it only has the lowest model ICC (Interior Command Centre) All the buttons are there to use the phone, but it doesn't seem to have the bluetooth moduel. Anyone know whats involved with installing and where you get them from, does it need a wire harness etc? All and any help would be appreciated blokes!

Hey Guys, We've got a bit of a dilemer. We have a rebuilt C6, we pulled the transmission and the motor out, the C6 was rebuilt and now we're peiceing it all back together now and have the motor in. We pieced it all back together, putting the flex plate and touque convertor on the engine would turn over, no problems at all. We're now up to setting the timing and putting the distributor back in and need to reset the timing, however we cannot get the engine to turn over in any gear. The tail shaft is not in the car yet so even if it was in gear, it should turn over? Appreciate any help.

I know theres nothing wrong with the starter because, although it was fitted, I had to remove it for another reason.

Starter motor isn't on. I'd say its needs to come apart by the sounds of it. I was a bit limited in what I could do yesterday because of an injruy, but I'll put it to the bloke, see what direction he wants to go from here. Thanks for your time people!

Love this trip Panko! Looks like you had a blast! The escort looks good getting along the road too! I have a hero5 session, which isn't great for battery life (about 2 hours give or take), I'll be looking at Hero5 soon just to get some longevity out of the battery! They're a great camera

Sorry to read about this Panko. Find out every scrap of information you can on it insurance wise. Insurance company may pay up to a dollar figure to fix it, but might also be happy for you to kick in some coin yourself to get work done. I've only heard that in rare circumstances happening though. Is paying the extra to get it fixed something you might consider? Especially seeings as this car holds so much centimental value to you!

Epic! I'm a fan of the silver too, but the real deal looks epic in gold! Look forward to seeing them on the car!

Probably a long shot but! By any chance does anyone know if the hayman reese setups for XF/XG fit the XH models? From what I've seen they would but I'd like to know for sure before I commit to buying one!

Hey man! Kinda forgot about this, but its still something I'm looking for! Not sure if I want to tackle making one though!

Not known yet! because they're expensive is mostly the reason why, even as wreaks! You can get a supercharged crate motor but from memory even those are about $18,000 with a loom etc

Basically Steve, Yes. But when you don't have a demister switch (Which panelvans dont!) they say to earth out a pin. They just dont tell you to earth out that pin 3 times!

Hey guys Need to reprogram a remote for the XH, I've tried earthing out the 2nd pin on the right hand side after turning the ignition onto ACC with no luck! Was going to try the rear demister trick (have to find the right plug though!!) Anyone able to get a photo of the colour of plug in the end of the rear demister switch in their EL for me? Pretty sure the econ plug has the same pins etc!

When you're earthing it out using the second PIN, earth it out three times within the five seconds from turning the key to ACC. Seems that little piece of information is missed out by everyone. They all say hit the demister 3 times but say nothing about earthing it out three times!!!

All fixed now

Ahh righto! No black plug, damn

Made to look easy!

Shouldn't that be solid?

Who is this noob guy? He does post updates in his build thread any more! Seriously would like to see what you've been up to with it Clint, I know photography has been keeping you plenty busy! Thom is right! I think there is a couple of inches difference? How much short does it need to be?

Didn't know there was a globe in them! If there is, mine has been blown since before I got it!

Yeah, my only concern with this shit on Egay is if it includes the microphone. The button came standard but from reading further the microphone might not have! If its the case that we need the full kit they're $330 on egay, but $395 from ford installed?

Okay guys, for future reference I found this on Fordforums! Turns out it doesn't have the module, but its on egay for $160 with loom. Will ring an auto electrician tomorrow to see what the cost is to install. It'll sort dad out for what he needs it for!

Yeah, this just missed out, April. 2010 build! I'll let you know man, got onto a tech pack on eBay I think. Not 100% yet!

Few photos there I took! I wish I had my new camera! He did, just isn't as active as I'd like him to be!

Where is OnDaGhia lol

Been a while, but I'm thinking of heading down this path! Any movement Thom?