-
Content Count
12,095 -
Joined
-
Last visited
-
Days Won
189
Posts posted by hendrixhc
-
-
steve mcqueen reacted to this -
Here are some picts Steve of my spoiler.
The spoiler ìs called a Monza I believe.
I have screwed mine too the bumper now due to they can be quite weak and I wanted better lines.
Sent from my SM-G973F using Tapatalksteve mcqueen reacted to this -
NIce Wags.
-
I just want a pan for mine that isn't dented and pitted. No after market ones available.
-
From what i understand the are hard to get.
You can get aftermarket from Lokkar if that interests you.
-
Not the ball out of the end of a bleed nipple snapped off inadvertently?
I found a Philips head screwdriver in the drivers door of Lucy yesterday!
Outback Jack reacted to this -
Corks fine as said, long as you use some sealant.
I also fitted the valley pan. No leaks at all.
Free.51 and CHESTNUTXE reacted to this -
Ive used an alloy ebay radiator in the XC for bout 4 + years with no issues, runs cold all day.
-
Funnily enough i have had to slot the passenger side guard bolt holes to get some panel gaps as well.
gerg reacted to this -
Sometimes you even need to cut 3mm off the bottom of the door to get the gaps right.
gerg reacted to this -
1 hour ago, slydog said:They sound no different. Only way to make a exhaust sound good is to put a stout engine on it.
Like a Clevo!
slydog reacted to this -
The 1600 escort is a fun little car to thrash but i would go the pinto with twin sidedraft webers. Old school cool all the way.
Outback Jack reacted to this -
I guess i should really check the NC fairlane manual to cause i may use the digi dash with the weezer conversion
Outback Jack reacted to this -
Yeah thanks JAck, got one here.
One section shows resistance but another suggests voltage outputs.
It states that the resistance should be between 11 and 152 ohms, of course which doesnt exist as an aftermarket sender.
Outback Jack reacted to this -
Im looking at pissing off the fuel tank in the ute and fitting a fuel sell but id like to know for sure if the gauge uses a resistive sender.
From what i can interpret from the service manual it does.
I can get a 5 bolt sender from aeroflow in three different resistance ratings but as per usual on the internet everyone has an opinion but id prefer a definitive answer.
Any help appreciated.
Outback Jack reacted to this -
-
Does this mean they wont ever insure it again?
-
-
For Fuck Sake is all i can say.
Long as youre all right thats the main thing.
This is why i drive my cars less and less on the road.
-
I like the "SAVY" kit for the bargain price of $7000.
-
Yeah been looking at their site but lousy info and no pricing
-
-
Interesting, i was thinking of the Wilwood upgrade.
-
Redundancies suck cause they make you feel somewhat worthless. I got made redundant after 9.5 years at my last job. I realised then it wasnt me but poor management on behalf of the place i was working. Chin up a new opportunity will present itself.
deankxf reacted to this
Wheels for xg falcon ute
in Wheels and Tyres
Posted
I had 14 x 8 with 265 60 14 on the back of my XG. They fit fine.
I now have 15 x 8 with 275 60? 15 with 4.5" BS. They fit fine but rub when there is a load in the tray. Best fix for this is not to put anything in the tray!