Free.51

Ive sanded thé front bar on thé ltd using 120 & 240 grit it is very smooth & am wondering if i could just clean it up & start painting or would i need to add primer, re sand & then paint?

Bumpers back on

Done..... Just need to smooth it out with a bit of 2000wd then clear coat & put hér back on the FD.not bad for spray cans.

I basically just followed ants instructions & sprayed it with flexi primer which is for plastics before using grey primer. I was just gonna clear coat it after all the colour is done.

Got the top painted today hopefully ill get the bottom painted tomorrow (platinum) th en clear coat it then bobs ur aunty

Ive done a few coats of flexi primer & a few of primer & sanded it with 400wd & 800wd & just washed the bar & is ready for paint but wont be doing it today maybe during the week.

Thanks heaps ants, ill continue with this next weekend

Thanks Dave i'll give them a buzz.

Hi guys i wont to know if i can use ba-fg rear bump stops on my FD? Ive tried to get hold of x series ones but no luck unless i buy the shocks too. I saw these on eBay & thought i wonder if theyll work what do u guys think?

Just looked at thé nolathane website, it has every bush except rear shock bump stop .forme x series

Me too.

I don't think I had any problems fitting the drivers side extractor on my clevo which has 4 into 1 genies, only issue was I had to jack the front end up pretty high for clearance so I could manoeuvre the extractor into place & so the flange at the end wouldn't scrape on the ground.

Thanks fellas.

This might sound silly but what is the purpose of a sandwich plate?, is it like a gasket or to prevent dust getting in to the engine/trans.

Look at dis effie

Whoa, what a beauty dyllan.

Hi guys I've noticed when I drive the Zl around for the for 30mins there's an annoying squeaking sound which only comes from the front right corner of the car but goes away after awhile any ideas on what might be causing it & how to stop it?

Cheers fellas.

Thanx for the replays guys, I spoke to Steve from Steves wheels in sunshine (round the corner from me) he said he'll do the 4 wheels & centre caps for $400 + $80 to remove & replace my tyres & balance them so I'm looking forward to getting them done in the next couple of weeks.

I wanna get my fe ltd wheels & centre caps refurbished can anyone recommend someone preferably in the west subs of melb.

These will look really nice all refurbished & polished up I reckon

You could score em with sand paper then prime & paint them.

Got it out, I opened the flap and it fell on the floor, thanks for your help dean, & adrianphu.

Was trying to hammer down a dent in the cowl panel on my ltd and the dolly slipped out of my hand and fell down a the hole on the passenger side. I've taken off the guard to see if there's an opening at the bottom but can't see one , I also bought a magnetic slinky type thing to stick down the hole but that isn't working either.any ideas on how to retrieve this dolly?.