will ba/bf fairlane electric seats plug into ba/bf fairmont ghia and everything on the new seats work

[car10001 52]

hi everyone

 

was wondering if the front seats from a ba/bf fairlane will plug straight into the existing wiring harness, will the fairlane front passenger seat plug into the ba ghia harness under existing seat.

with the passenger seat being manual is there plugs under the existing seat in the ba ghia for the motors and switch trim just sitting there or is there only a airbag plug and pre tensioner plug and you have to run the wires for the motors.

 

is there wires already in the plugs under the manual seat for the electric seat harness and motors with the extra pins not being used or do you have to add them.

with the drivers seat being part electric will the full electric seat plug into the existing floor harness. 

 

will the existing memory module be able to be transfered over and will it plug into the full electric seat plugs and the existing body harness.

 

will you need a new memory module and ifso will the one that comes with the electric seat work with the existing pedal and mirrors and will it plug into old floor harness.

 

how have yous gone about upgrading the electric seat to full electric from a fairlane for drivers side and replacing the manual passenger seat with a electric one from a fairlane.

 

will the rear seat from a fairlane fit the fairmont ghia in the ba. not sure if bolsters are same as sedan but think the fairlanes being lwb might be wider.

 

does the bf fairmont ghia have a electric passenger seat or is it same as ba where it only has a drivers side part electric.

 

also will fg front seats fit the ba runners and rails and what about back seat.

 

front drivers seat has a tear and the top of the rear seat in top section is a bit hard and looking to tidy things up and just throwing ideas as am keeping car long term.

 

if anyone can please help with answers that would be great.

 

thanks