Squid 55 Posted December 26, 2013 Hey Ladettes, Whats the go with removing the rear bumper on wags? i tried but found two nuts inside the bumper that wouldnt budge.... Help?! Share this post Link to post Share on other sites
SPArKy_Dave 8,942 Posted December 26, 2013 Two flanges, one at the end of each chassis rail. up to four bolts per side. The threads are captive on the bumperbar brackets, unless an aftermarket towbar has been fitted. Share this post Link to post Share on other sites
Jonathan Mark Davidson 169 Posted December 26, 2013 yes what dave said i'm not looking forward to it when i go to fit my tow bar Share this post Link to post Share on other sites
Squid 55 Posted December 26, 2013 Hmmm.. Okay.. I'll have to have a look, taking it off for a new coat of paint Sent from my iPhone using Tapatalk Share this post Link to post Share on other sites
Squid 55 Posted December 26, 2013 Also, do you guys know if it's possible to remove the rear number plate and reverse light section on a wagon? Or even just the reverse light covers? Sent from my iPhone using Tapatalk Share this post Link to post Share on other sites
SPArKy_Dave 8,942 Posted December 27, 2013 Yes - the whole assembly comes out, by undoing four screws/bolts, on the inside of the tailgate in the middle. - the screws literally back onto the whole numberplate/reverse light assembly. Then once removed, you'll see that there are two tiny screws holding each reverse light lense on from behind. Share this post Link to post Share on other sites
Squid 55 Posted December 27, 2013 Ahhh sweet!! Thanks Sent from my iPhone using Tapatalk Share this post Link to post Share on other sites